Glycerinediglycidyletheracrylicacidadducts
glycerol 1,3-diglycerolate diacrylate
CAS: 60453-84-1
Molecular Formula: C15H24O9
Glycerinediglycidyletheracrylicacidadducts - Names and Identifiers
| Name | glycerol 1,3-diglycerolate diacrylate |
| Synonyms | TRIGLYCEROL DIACRYLATE GLYCEROL 1,3-DIGLYCEROLATE DIACRYLATE glycerol 1,3-diglycerolate diacrylate Glycerinediglycidyletheracrylicacidadducts GLYCEROL 1,3-DIGLYCEROLATE DIACRYLATE, T ECH. Glycerol 1,3-diglycerolate diacrylate technical grade 2,6,10-trihydroxy-4,8-dioxaundecamethylene diacrylate 2-Propenoicacid,(2-hydroxy-1,3-propanediyl)bis[oxy(2-hydroxy-3,1-propanediyl)]ester 2-Propenoic acid, 1,1'-[(2-hydroxy-1,3-propanediyl)bis[oxy(2-hydroxy-3,1-propanediyl)]] ester |
| CAS | 60453-84-1 |
| InChI | InChI=1/C15H24O9/c1-3-14(19)23-9-12(17)7-21-5-11(16)6-22-8-13(18)10-24-15(20)4-2/h3-4,11-13,16-18H,1-2,5-10H2 |
Glycerinediglycidyletheracrylicacidadducts - Physico-chemical Properties
| Molecular Formula | C15H24O9 |
| Molar Mass | 348.35 |
| Density | 1.237g/mLat 25°C(lit.) |
| Boling Point | 516.0±50.0 °C(Predicted) |
| Flash Point | >230°F |
| Vapor Presure | 8.3E-13mmHg at 25°C |
| pKa | 12.74±0.20(Predicted) |
| Storage Condition | 2-8°C |
| Refractive Index | n20/D 1.446(lit.) |
Glycerinediglycidyletheracrylicacidadducts - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | 34 - Causes burns |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 3265 8 / PGIII |
| WGK Germany | 3 |
Glycerinediglycidyletheracrylicacidadducts - Introduction
glycerol 1,3-diglycerolate diacrylate is a chemical substance, also known as G3-DA or Glycerol 1,3-diglycerolate diacrylate. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to light yellow liquid at room temperature.
-Solubility: can be dissolved in organic solvents, such as alcohols and ethers.
-Odor: Has a special smell.
Use:
- G3-DA is widely used in photopolymerization, that is, the reaction is triggered by ultraviolet light or other appropriate light sources to cause crosslinking or curing.
-It is often used in photocurable coatings, adhesives, printing inks and other fields, as a crosslinking agent or diluent.
Preparation Method:
-The preparation of G3-DA requires the reaction of glycerol 1,3-diglycerol with acrylic esters.
-The specific steps include placing glycerol 1,3-diglycerol and acrylate in a suitable reaction container, and reacting under suitable temperature and time conditions to finally obtain the G3-DA product.
Safety Information:
-The G3-DA has less impact on humans and the environment under general conditions of use.
-When using G3-DA, care should be taken to avoid direct contact with skin and eyes to avoid irritation or damage.
-If you come into contact with G3-DA, rinse immediately with plenty of water and seek medical help.
-Pay attention to ventilation during use and avoid inhaling its vapor or mist.
-When storing, the G3-DA should be placed in a sealed container, away from fire and high temperature, and avoid contact with oxidants or strong acids and bases.
Please note that in order to ensure the safe and correct use of chemical substances, it is recommended to carefully read the relevant safety data sheets and operating instructions before use.
Nature:
-Appearance: Colorless to light yellow liquid at room temperature.
-Solubility: can be dissolved in organic solvents, such as alcohols and ethers.
-Odor: Has a special smell.
Use:
- G3-DA is widely used in photopolymerization, that is, the reaction is triggered by ultraviolet light or other appropriate light sources to cause crosslinking or curing.
-It is often used in photocurable coatings, adhesives, printing inks and other fields, as a crosslinking agent or diluent.
Preparation Method:
-The preparation of G3-DA requires the reaction of glycerol 1,3-diglycerol with acrylic esters.
-The specific steps include placing glycerol 1,3-diglycerol and acrylate in a suitable reaction container, and reacting under suitable temperature and time conditions to finally obtain the G3-DA product.
Safety Information:
-The G3-DA has less impact on humans and the environment under general conditions of use.
-When using G3-DA, care should be taken to avoid direct contact with skin and eyes to avoid irritation or damage.
-If you come into contact with G3-DA, rinse immediately with plenty of water and seek medical help.
-Pay attention to ventilation during use and avoid inhaling its vapor or mist.
-When storing, the G3-DA should be placed in a sealed container, away from fire and high temperature, and avoid contact with oxidants or strong acids and bases.
Please note that in order to ensure the safe and correct use of chemical substances, it is recommended to carefully read the relevant safety data sheets and operating instructions before use.
Last Update：2024-04-09 15:17:58
