JT010
JT010
CAS: 917562-33-5
Molecular Formula: C16H19ClN2O3S
JT010 - Names and Identifiers
JT010 - Physico-chemical Properties
| Molecular Formula | C16H19ClN2O3S |
| Molar Mass | 354.85 |
| Solubility | Soluble in DMSO |
| Appearance | powder |
| Color | white to beige |
| Storage Condition | 2-8°C |
| Use | JT010 is a potent agonist of TRPA1 with an EC50 value of 0.65 nM. |
JT010 - Reference
| Reference Show more | 1: Takaya J, Mio K, Shiraishi T, Kurokawa T, Otsuka S, Mori Y, Uesugi M. A Potent and Site-Selective Agonist of TRPA1. J Am Chem Soc. 2015 Dec 23;137(50):15859-64. doi: 10.1021/jacs.5b10162. PubMed PMID: 26630251. |
JT010 - Preparation solution concentration reference
| 1mg | 5mg | 10mg | |
|---|---|---|---|
| 1 mM | 2.818 ml | 14.09 ml | 28.181 ml |
| 5 mM | 0.564 ml | 2.818 ml | 5.636 ml |
| 10 mM | 0.282 ml | 1.409 ml | 2.818 ml |
| 5 mM | 0.056 ml | 0.282 ml | 0.564 ml |
Last Update：2024-01-02 23:10:35
JT010 - Introduction
JT010, whose full name is methyl isopropyl methyl ether, is a commonly used organic compound. The following is an introduction to the nature, use, formulation and safety information of JT010:
Nature:
1. Appearance: colorless liquid.
2. Molecular formula: C5H12O, molecular weight: 88.15.
3. Density: 0.73g/cm³, Boiling Point: 56-58 ℃, Flash point:-40 ℃.
4. Solubility: not miscible with water, soluble in most organic solvents such as alcohol, ether, etc.
Use:
1. As an organic solvent: JT010 is widely used in paints, coatings, cleaners and adhesives as an organic solvent due to its low boiling point and good solubility.
2. Chemical Synthesis: JT010 can be used as a solvent and intermediate in organic synthesis reactions, for the preparation of organic compounds, drugs and spices.
3. Pharmaceutical applications: In some pharmaceutical preparations, JT010 can be used as an auxiliary solvent and diluent.
Preparation Method:
JT010 is typically obtained by an acid-catalyzed etherification reaction of methanol and isopropanol. The specific step is to mix methanol and isopropyl alcohol in a certain molar ratio, and add an acidic catalyst such as sulfuric acid, phosphoric acid, etc., and heat the reaction. After the reaction, JT010 is obtained.
Safety Information:
1. JT010 is a flammable liquid. Contact with open flame or high temperature will cause fire. Keep away from fire and heat sources.
2. Use or storage JT010 to maintain a well-ventilated place, avoid inhalation of high concentrations of steam.
3. Wear personal protective equipment such as protective glasses and gloves during use to prevent direct contact with skin and eyes.
4. If JT010 leaks, measures should be taken quickly to avoid diffusion, and appropriate adsorption materials should be used for removal.
5. JT010 should not be discharged into sewers or the environment, and should be properly treated and disposed of in accordance with local regulations.
Please note that JT010 is an organic compound and should be operated in an appropriate laboratory environment and follow relevant safe operating procedures.
Nature:
1. Appearance: colorless liquid.
2. Molecular formula: C5H12O, molecular weight: 88.15.
3. Density: 0.73g/cm³, Boiling Point: 56-58 ℃, Flash point:-40 ℃.
4. Solubility: not miscible with water, soluble in most organic solvents such as alcohol, ether, etc.
Use:
1. As an organic solvent: JT010 is widely used in paints, coatings, cleaners and adhesives as an organic solvent due to its low boiling point and good solubility.
2. Chemical Synthesis: JT010 can be used as a solvent and intermediate in organic synthesis reactions, for the preparation of organic compounds, drugs and spices.
3. Pharmaceutical applications: In some pharmaceutical preparations, JT010 can be used as an auxiliary solvent and diluent.
Preparation Method:
JT010 is typically obtained by an acid-catalyzed etherification reaction of methanol and isopropanol. The specific step is to mix methanol and isopropyl alcohol in a certain molar ratio, and add an acidic catalyst such as sulfuric acid, phosphoric acid, etc., and heat the reaction. After the reaction, JT010 is obtained.
Safety Information:
1. JT010 is a flammable liquid. Contact with open flame or high temperature will cause fire. Keep away from fire and heat sources.
2. Use or storage JT010 to maintain a well-ventilated place, avoid inhalation of high concentrations of steam.
3. Wear personal protective equipment such as protective glasses and gloves during use to prevent direct contact with skin and eyes.
4. If JT010 leaks, measures should be taken quickly to avoid diffusion, and appropriate adsorption materials should be used for removal.
5. JT010 should not be discharged into sewers or the environment, and should be properly treated and disposed of in accordance with local regulations.
Please note that JT010 is an organic compound and should be operated in an appropriate laboratory environment and follow relevant safe operating procedures.
Last Update：2024-04-09 15:16:35
Supplier List
Product Name: JT010 Visit Supplier Webpage Request for quotation
CAS: 917562-33-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 917562-33-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: JT010 Visit Supplier Webpage Request for quotation
CAS: 917562-33-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 917562-33-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History