Name | minoxidil |
Synonyms | alostil lonolox alopexil minoxidil 6-piperidino-2,4-diaminopyrimidine3-oxide 2,4-Diamino-6-piperidino-pyrimidine-3-oxide 2,4-diamino-6-piperidinopyrimidine3-n-oxide 4-pyrimidinediamine,6-(1-piperidinyl)-3-oxide 6-(1-Piperidinyl)-2,4-pyrimidinediamine-3-oxide 6-(piperidin-1-yl)pyrimidine-2,4-diamine 3-oxide 2,6-diamino-4-(piperidin-1-yl)pyrimidin-1-ium-1-olate (2E)-6-amino-2-imino-4-(piperidin-1-yl)pyrimidin-1(2H)-ol 6-amino-1,2-dihydro-1-hydroxy-2-imino-4-piperidinopyrimidine |
CAS | 38304-91-5 |
EINECS | 253-874-2 |
InChI | InChI=1/C9H15N5O/c10-7-6-8(12-9(11)14(7)15)13-4-2-1-3-5-13/h6H,1-5,10H2,(H2,11,12) |
InChIKey | ZFMITUMMTDLWHR-UHFFFAOYSA-N |
Molecular Formula | C9H15N5O |
Molar Mass | 209.25 |
Density | 1.1651 (rough estimate) |
Melting Point | 272-274 °C (dec.) (lit.) |
Boling Point | 348.61°C (rough estimate) |
Flash Point | 283.364°C |
Water Solubility | Soluble in water (2.2 mg/ml), 100% ethanol (29 mg/ml), propylene glycol, acetone, DMSO (6.5 mg/ml), and methanol. |
Solubility | Slightly soluble in ethanol and chloroform, almost insoluble in water |
Vapor Presure | 0mmHg at 25°C |
Appearance | Crystalline powder |
Color | White |
Merck | 14,6203 |
pKa | 4.61(at 25℃) |
Storage Condition | 2-8°C |
Stability | Stable for 2 years from date of purchase as supplied. Protect from moisture. Solutions in DMSO or ethanol may be stored at -20°C for up to 3 months. |
Refractive Index | 1.7610 (estimate) |
MDL | MFCD00063409 |
Physical and Chemical Properties | Appearance: White Crystal Melting Point: 258-262 ℃ |
Use | Antihypertensive drugs for the treatment of refractory, primary, or renal hypertension |
Risk Codes | R22 - Harmful if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. R26/27/28 - Very toxic by inhalation, in contact with skin and if swallowed. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S22 - Do not breathe dust. |
WGK Germany | 3 |
RTECS | UV8200000 |
HS Code | 29335990 |
Toxicity | LD50 in rats, mice (mg/kg): 49, 51 i.v. (Carlson, Feenstra) |
Reference Show more | 1. Feng Jiaoji Hongyu Zhang Chengcheng et al. Determination of minoxidil in minoxidil microemulsion by HPLC [J]. China pharmacist 2018 21(09):185-188. 2. Xu, Kexin, et al. "Glibenclamide Targets Sulfonylurea Receptor 1 to Inhibit p70S6K Activity and Upregulate KLF4 Expression to Suppress Non-Small Cell." Molecular cancer therapeutics 18.11 (2019): 2085-2096. |
This product is 6-(1-piperidinyl)-2, 4-pyrimidine diamine, 3-oxide. The content of C9H15N50 shall not be less than 99.0% calculated as dry product.
take about 20mg of this product, precision weighing, according to the oxygen flask combustion method (General 0703) for organic damage, with 0.lmol/L sodium hydroxide solution (10ml) was used as absorption liquid. After the combustion was completed, it was shaken strongly for several minutes, and the bottle stopper and platinum wire were rinsed with a small amount of water, move the absorption liquid into a 50ml Nessler's Cuvette, and check with the control liquid according to the chloride inspection method (General rule 0801) (operate in the same manner as the test sample, but do not contain the test sample in the filter paper during combustion, and add standard sodium chloride solution 4.0ml) comparison, not more concentrated (0.2%).
take an appropriate amount of this product, accurately weigh, add mobile phase to dissolve and dilute to make a solution containing about 0.25mg per lml, as a test solution; Take an appropriate amount of precision, A solution containing about 2.5ug per 1 ml was prepared as a control solution by quantitative dilution with mobile phase. Test according to high performance liquid chromatography (General 0512). Silica gel bonded with eighteen alkyl silane as filler; Methanol-water-glacial acetic acid (70:30:1)(3.0g of sodium Dioctyl Sulfosuccinate per 3.0 ML, and adjust the pH value to with perchloric acid) mobile phase; The detection wavelength was 240nm. Take appropriate amount of this product and medroxyprogesterone acetate, add mobile phase to dissolve and dilute to make a mixed solution containing about 0.25mg in each lml, take 10ul, inject human liquid chromatograph, record chromatogram, the number of theoretical plates is not less than 2000 calculated by minoxidil peak, and the separation degree between minoxidil peak and medroxyprogesterone acetate peak should be greater than 2.0. Take 10 u1 of the test solution and the control solution respectively, inject the human liquid chromatograph, record the chromatogram to 2 times of the retention time of the main component peak. If there are impurity peaks in the chromatogram of the test solution, the sum of each impurity peak area shall not be greater than the main peak area of the control solution (1.0%).
take this product, dry to constant weight at 105°C, weight loss shall not exceed 0.5% (General rule 0831).
take l.Og of this product and check it according to law (General rule: 0841). The residual residue shall not exceed 0.15%.
The residue left under the item of taking the ignition residue shall not contain more than 20 parts per million of heavy metal when examined by law (General rule 0821, Law II).
take this product about 0.15g, precision weighing, add glacial acetic acid 50ml, micro temperature to dissolve, according to the potential titration method (General 0701), with perchloric acid titration solution (O. 1 mol/L) titration, and the results of the titration were corrected with a blank test. Each 1 ml of perchloric acid titration solution (0.1 mol/L) corresponds to 20.93mg of C9H15N50.
antihypertensive drugs.
light shielding, sealed storage.
This product contains minoxidil (C9H15N50) should be 90.0% to 110.0% of the label.
This product is white tablet.
Take 20 tablets of this product, precision weighing, fine grinding, precision weighing appropriate amount (about equivalent to minoxidil 20mg), put it in a 100ml measuring flask, add hydrochloric acid solution (9-1000) about 60ml, shake to dissolve minoxidil, dilute to the scale with hydrochloric acid solution (9-1000), shake well, filter, take 2ml continuous filtrate and place it in another 100ml measuring flask, dilute to scale with hydrochloric acid solution (9-1000), shake well, measure absorbance at the wavelength of 281nm by UV-Vis spectrophotometry (General rule 0401), precision weighing, plus hydrochloric acid solution (9-1000) dissolved and quantitatively diluted into each 1 ml containing minoxidil 4ug of the solution, the same method of determination, that is.
Same as minoxidil.
2.5mg