N-(N-ACETYLLEUCYL)-3-AMINOPROPYLTRIETHOXYSILANE
N-(N-Acetylleucyl)-3-Aminopropyltriethoxysilane
CAS: 1367348-25-1
Molecular Formula: C17H36N2O5Si
N-(N-ACETYLLEUCYL)-3-AMINOPROPYLTRIETHOXYSILANE - Names and Identifiers
N-(N-ACETYLLEUCYL)-3-AMINOPROPYLTRIETHOXYSILANE - Physico-chemical Properties
| Molecular Formula | C17H36N2O5Si |
| Molar Mass | 376.56 |
| Flash Point | 15°C (59°F) |
| Specific Gravity | 0.816 |
| Sensitive | 7: reacts slowly with moisture/water |
N-(N-ACETYLLEUCYL)-3-AMINOPROPYLTRIETHOXYSILANE - Introduction
N-(N-acetylleuyl)-3-aminopropyltriethoxysilane, also known as (3-Aminopropyl)triethoxysilane, has the formula C9H23NO3Si. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 221.37g/mol
-Melting point:-85 ℃
-Boiling point: 217-218 ℃
-Density: 0.928g/cm³
-Refractive index (n20/D):1.416
-Solubility: Soluble in organic solvents such as ethanol and ether, slightly soluble in water.
Use:
-As a silane coupling agent: N-(N-acetylleuconyl)-3-aminopropyltriethoxysilane can be used as a silane coupling agent to improve the adhesion of organic and inorganic substances. It can form a strong connection at the organic-inorganic interface and improve the performance of coatings, adhesives, fillers and composites.
-Surface treatment agent: This compound can be used for surface treatment, enhance the compatibility of the material with the bottom layer, and improve wettability and adhesion.
-Plasticizer: It can also be used as a plasticizer for plastics and rubber to improve the tensile strength and softness of silicone rubber.
Preparation Method:
N-(N-acetylleuinyl)-3-aminopropyltriethoxysilane can be obtained by reacting acetyl chloride with 3-aminopropyltriethoxysilane in the presence of a base.
Safety Information:
-This compound is an organic silicon compound and generally has low toxicity.
-Avoid contact with skin and eyes during use, and use personal protective equipment such as protective gloves and goggles.
-should be operated in a well-ventilated environment, avoid inhalation of its vapor.
-If inhaled or exposed to the compound, rinse with plenty of water and seek medical advice.
It should be noted that this information is for reference only. Please read carefully and follow the relevant chemical safety operating procedures and technical standards before practical application.
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 221.37g/mol
-Melting point:-85 ℃
-Boiling point: 217-218 ℃
-Density: 0.928g/cm³
-Refractive index (n20/D):1.416
-Solubility: Soluble in organic solvents such as ethanol and ether, slightly soluble in water.
Use:
-As a silane coupling agent: N-(N-acetylleuconyl)-3-aminopropyltriethoxysilane can be used as a silane coupling agent to improve the adhesion of organic and inorganic substances. It can form a strong connection at the organic-inorganic interface and improve the performance of coatings, adhesives, fillers and composites.
-Surface treatment agent: This compound can be used for surface treatment, enhance the compatibility of the material with the bottom layer, and improve wettability and adhesion.
-Plasticizer: It can also be used as a plasticizer for plastics and rubber to improve the tensile strength and softness of silicone rubber.
Preparation Method:
N-(N-acetylleuinyl)-3-aminopropyltriethoxysilane can be obtained by reacting acetyl chloride with 3-aminopropyltriethoxysilane in the presence of a base.
Safety Information:
-This compound is an organic silicon compound and generally has low toxicity.
-Avoid contact with skin and eyes during use, and use personal protective equipment such as protective gloves and goggles.
-should be operated in a well-ventilated environment, avoid inhalation of its vapor.
-If inhaled or exposed to the compound, rinse with plenty of water and seek medical advice.
It should be noted that this information is for reference only. Please read carefully and follow the relevant chemical safety operating procedures and technical standards before practical application.
Last Update：2024-04-10 22:29:15
