N-BENZENESULFONYLPYRROLE
1-(Phenylsulfonyl)Pyrrole
CAS: 16851-82-4
Molecular Formula: C10H9NO2S
N-BENZENESULFONYLPYRROLE - Names and Identifiers
| Name | 1-(Phenylsulfonyl)Pyrrole |
| Synonyms | N-Benzenesulfonylpyrrole N-BENZENESULFONYLPYRROLE 1-(PHENYLSULFONYL)PYRROLE 1-(Phenylsulfonyl)Pyrrole N-Benzenesulphonylpyrrole 1-(PHENYLSULPHONYL)PYRROLE 1-(Benzenesulfonyl)Pyrrole 1-(Phenylsulphonyl)Pyrrole 1-(Phenylsulfonyl)-1H-Pyrrole 1-(PHENYLSULFONYL)-1H-PYRROLE 1-(phenylsulphonyl)-1H-pyrrole 1-(Phenylsulphonyl)-1H-Pyrrole |
| CAS | 16851-82-4 |
| EINECS | 623-685-3 |
| InChI | InChI=1/C10H9NO2S/c12-14(13,11-8-4-5-9-11)10-6-2-1-3-7-10/h1-9H |
N-BENZENESULFONYLPYRROLE - Physico-chemical Properties
| Molecular Formula | C10H9NO2S |
| Molar Mass | 207.25 |
| Density | 1.2784 (rough estimate) |
| Melting Point | 88-91 °C (lit.) |
| Boling Point | 368.9±25.0 °C(Predicted) |
| Flash Point | 176.9°C |
| Solubility | soluble in Methanol |
| Vapor Presure | 1.23E-05mmHg at 25°C |
| Appearance | Beige to light brown crystals or crystalline powder |
| Color | Beige to light brown |
| BRN | 1619427 |
| pKa | -8.50±0.70(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.5250 (estimate) |
| MDL | MFCD00067739 |
| Physical and Chemical Properties | WGK Germany:3 |
N-BENZENESULFONYLPYRROLE - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S37/39 - Wear suitable gloves and eye/face protection |
| WGK Germany | 3 |
| HS Code | 29350090 |
N-BENZENESULFONYLPYRROLE - Introduction
1-(Phenylsulfonyl)Pyrrole (abbreviated as BSP) is an organic compound with the chemical formula C11H9NO2S.
Nature:
BSP is a white solid with a strong odor of thioester. It has a high melting point and boiling point, and is not volatile at room temperature. It is almost insoluble in water, but soluble in organic solvents such as ethanol, methanol and chloroform.
Use:
The BSP has many uses in chemical research and industrial production. As a derivative of aromatic hydrocarbons, BSP is often used as a reagent in organic synthesis for the synthesis of other organic compounds. It can also be used as a monomer for dyes, dye intermediates and high molecular polymers.
Method:
The preparation of BSP is generally obtained by reacting benzene sulfonyl chloride and pyrrole after dissolving in an organic solvent. During the preparation process, attention should be paid to safety and operating conditions, such as low temperature and avoiding operation in air.
Safety Information:
BSP in drinking, inhalation or contact with skin, eyes, etc., may cause harm to human health. After exposure to BSP, the affected area should be rinsed immediately with plenty of clean water. Work should wear suitable protective equipment, and in good ventilation conditions. When using or storing the BSP, the corresponding safe handling and handling regulations should be observed, and the BSP should be properly stored in a sealed container. If further required, it is recommended to locate the relevant safety data sheet for more detailed information.
Nature:
BSP is a white solid with a strong odor of thioester. It has a high melting point and boiling point, and is not volatile at room temperature. It is almost insoluble in water, but soluble in organic solvents such as ethanol, methanol and chloroform.
Use:
The BSP has many uses in chemical research and industrial production. As a derivative of aromatic hydrocarbons, BSP is often used as a reagent in organic synthesis for the synthesis of other organic compounds. It can also be used as a monomer for dyes, dye intermediates and high molecular polymers.
Method:
The preparation of BSP is generally obtained by reacting benzene sulfonyl chloride and pyrrole after dissolving in an organic solvent. During the preparation process, attention should be paid to safety and operating conditions, such as low temperature and avoiding operation in air.
Safety Information:
BSP in drinking, inhalation or contact with skin, eyes, etc., may cause harm to human health. After exposure to BSP, the affected area should be rinsed immediately with plenty of clean water. Work should wear suitable protective equipment, and in good ventilation conditions. When using or storing the BSP, the corresponding safe handling and handling regulations should be observed, and the BSP should be properly stored in a sealed container. If further required, it is recommended to locate the relevant safety data sheet for more detailed information.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 1-(Phenylsulfonyl)Pyrrole Visit Supplier Webpage Request for quotationCAS: 16851-82-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: 1-(Phenylsulfonyl)Pyrrole Visit Supplier Webpage Request for quotationCAS: 16851-82-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History