NN-Methylene-Bis-acrylamide
NN-Methylene-Bis-acrylamide
CAS:
Molecular Formula: C15H26N2O2
NN-Methylene-Bis-acrylamide - Names and Identifiers
| Name | NN-Methylene-Bis-acrylamide |
| Synonyms | Waterproof agent |
NN-Methylene-Bis-acrylamide - Physico-chemical Properties
| Molecular Formula | C15H26N2O2 |
| Molar Mass | 266.37914 |
NN-Methylene-Bis-acrylamide - Introduction
A water repellent is a chemical used to increase the water resistance of a material or surface. It can prevent moisture from penetrating or accumulating through the material without changing the appearance and performance of the material.
Waterproofing agent mainly has the following characteristics:
1. Highly waterproof performance: The waterproof agent can form a protective layer to prevent moisture from penetrating into the material.
2. Durability: The waterproof agent can maintain its waterproof effect for a long time, and is not easily affected by daily use and environmental factors.
3. Breathability: A good waterproofing agent should also allow water vapor inside the material to escape to avoid moisture accumulation and material damage.
Waterproofing agents have a wide range of applications, including but not limited to the following:
1. Building materials: used in building structures such as walls, roofs and floors to prevent moisture penetration and damage.
2. wood protection: waterproof indoor and outdoor wood to prevent corrosion and expansion caused by moisture.
3. Textiles: used for waterproof clothing, shoes, tents and other textile products, providing rain and moisture-proof effect.
4. Automobile: Used in automobile chassis, shell or roof to provide waterproof and corrosion protection.
There are many ways to prepare waterproofing agents, common ones include:
1. Polymer coating method: a polymer containing a waterproofing agent component is coated on the surface of the material to form a waterproofing film.
2. Penetration method: The waterproof agent penetrates into the material and combines with the molecules on the surface of the material to form a waterproof layer.
3. Spray method: Use a sprayer to evenly spray the waterproof agent on the surface of the material to make it evenly distributed and cured.
The following safety information should be paid attention to when using waterproofing agent:
1. waterproofing agent may contain organic solvents or chemicals, in the use of the process to maintain good ventilation, avoid inhalation.
2. part of the waterproofing agent may be irritating, please wear protective gloves and glasses when using, to prevent contact with skin or eyes.
3. select appropriate waterproofing agent according to the use environment and purpose, and use it in strict accordance with the product manual or the manufacturer's recommendation.
4. in the storage and handling of waterproofing agent, we should pay attention to avoid contact with heat source, fire source and oxidant, to prevent fire and explosion.
When using waterproofing agents, it is recommended to carefully read the product manual and relevant safety information, and follow the correct operating procedures to ensure safety and best results. If necessary, professionals can also be invited to operate.
Waterproofing agent mainly has the following characteristics:
1. Highly waterproof performance: The waterproof agent can form a protective layer to prevent moisture from penetrating into the material.
2. Durability: The waterproof agent can maintain its waterproof effect for a long time, and is not easily affected by daily use and environmental factors.
3. Breathability: A good waterproofing agent should also allow water vapor inside the material to escape to avoid moisture accumulation and material damage.
Waterproofing agents have a wide range of applications, including but not limited to the following:
1. Building materials: used in building structures such as walls, roofs and floors to prevent moisture penetration and damage.
2. wood protection: waterproof indoor and outdoor wood to prevent corrosion and expansion caused by moisture.
3. Textiles: used for waterproof clothing, shoes, tents and other textile products, providing rain and moisture-proof effect.
4. Automobile: Used in automobile chassis, shell or roof to provide waterproof and corrosion protection.
There are many ways to prepare waterproofing agents, common ones include:
1. Polymer coating method: a polymer containing a waterproofing agent component is coated on the surface of the material to form a waterproofing film.
2. Penetration method: The waterproof agent penetrates into the material and combines with the molecules on the surface of the material to form a waterproof layer.
3. Spray method: Use a sprayer to evenly spray the waterproof agent on the surface of the material to make it evenly distributed and cured.
The following safety information should be paid attention to when using waterproofing agent:
1. waterproofing agent may contain organic solvents or chemicals, in the use of the process to maintain good ventilation, avoid inhalation.
2. part of the waterproofing agent may be irritating, please wear protective gloves and glasses when using, to prevent contact with skin or eyes.
3. select appropriate waterproofing agent according to the use environment and purpose, and use it in strict accordance with the product manual or the manufacturer's recommendation.
4. in the storage and handling of waterproofing agent, we should pay attention to avoid contact with heat source, fire source and oxidant, to prevent fire and explosion.
When using waterproofing agents, it is recommended to carefully read the product manual and relevant safety information, and follow the correct operating procedures to ensure safety and best results. If necessary, professionals can also be invited to operate.
Last Update：2024-04-09 19:05:39
