Name | Rhodium(III)2,4-pentanedionate |
Synonyms | rhodium(+3) cation Rhodiumpentanedionate Rhodium acetylacetonate Rhodium 2,4-pentanedionate (Z)-4-oxopent-2-en-2-olate Rhodium(III) acetylacetonate Tris(acetylacetonato)rhodium Rhodium tris(acetylacetonate) Rhodium(Ⅲ) 2,4-pentanedionate Rhodium(III)2,4-pentanedionate Rhodium iii 2,4-pentanedionate Rhodiumacetylacetonateyellowxtl Tris(2,4-pentanedionato)rhodium Rhodium(III) 2,4-pentanedionate Rhodium, tris(2,4-pentanedionato)- Tris(acetylacetonato)rhodium (III) 4-pentanedionato-o,o')-tris((oc-6-11)-rhodiu Rhodium, tris(2,4-pentanedionato-O,O')-, (OC-6-11)- |
CAS | 14284-92-5 |
EINECS | 238-192-5 |
InChI | InChI=1/3C5H8O2.Rh/c3*1-4(6)3-5(2)7;/h3*3,6H,1-2H3;/q;;;+3/p-3/b3*4-3- |
Molecular Formula | C15H21O6Rh |
Molar Mass | 400.23 |
Melting Point | 263-264°C(lit.) |
Boling Point | >280°C |
Water Solubility | insoluble |
Appearance | Yellow or orange powder |
Specific Gravity | 1.607 |
Color | Yellow to yellow-orange |
Exposure Limit | ACGIH: TWA 1 mg/m3NIOSH: IDLH 100 mg/m3; TWA 0.1 mg/m3 |
Storage Condition | Inert atmosphere,Room Temperature |
MDL | MFCD00083144 |
Physical and Chemical Properties | Yellow crystalline powder, soluble in benzene, chloroform, acetone, ether, pentane, slightly soluble in methanol, ethanol, insoluble in water. Melting point 263-2644 ℃, decomposition temperature 280 ℃. |
Hazard Symbols | Xn - Harmful![]() |
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin. R40 - Limited evidence of a carcinogenic effect R63 - Possible risk of harm to the unborn child |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
WGK Germany | 3 |
TSCA | Yes |
HS Code | 28439000 |
NIST chemical information | Information provided by: webbook.nist.gov (external link) |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
use | (1)Rh(acac)3 and hydroxypyridine catalyzed CO/H2 synthesis of ethylene glycol; Rh(acac)3 catalyzed selective reduction of dicarboxylic acid monoester; Using Rh(acac)3/THF system to prepare ultra-porous rhodium membrane catalyst on silicon. (2) Using Pd(acac)2 and Rh(acac)3 as precursors, metal and alloy coatings and films were prepared by CVD technology. (3) Used as a homogeneous catalyst for hydrosilylation reaction, asymmetric redox reaction, etc. (4) Preparation of Lao carrier catalyst. (5) Preparation of nanoparticles or nano-alloy particles, metal colloids and nano-metal carrier catalysts. MOCVD precursor compound, homogeneous catalyst, precursor compound for preparing supported catalyst |
production method | mixing rhodium nitrate (iii) aqueous solution containing 0.1g rhodium and 10mL 0.2mol/L nitric acid, and adjusting the pH value to 4 with 10% sodium bicarbonate aqueous solution. At this pH, the light yellow hydroxide (or basic nitrate) begins to precipitate. Add 5mL of acetylacetone and heat to reflux the reaction mixture. After a few minutes, orange-yellow crystals began to precipitate, and the pH value of the mixed solution also decreased. After 30min, adjust the pH value to 4 and continue to reflux for 15min. Then cool to room temperature, filter out the precipitated crystals and dry them. Recrystallization with water and methanol mixed solvent to obtain 0.3g of rhodium acetylacetonate with 75% yield. |