TERT-BUTYL(DICHLOROMETHYL)DIMETHYLSILANE - Names and Identifiers
TERT-BUTYL(DICHLOROMETHYL)DIMETHYLSILANE - Physico-chemical Properties
Molecular Formula | C7H16Cl2Si
|
Molar Mass | 199.19 |
Density | 0.981±0.06 g/cm3(Predicted) |
Melting Point | 42-45 °C (lit.) |
Boling Point | 70 °C/20 mmHg (lit.) |
Flash Point | 69.3°C |
Vapor Presure | 0.633mmHg at 25°C |
Appearance | solid |
Storage Condition | -20°C |
Sensitive | 3: reacts with aqueous base |
Refractive Index | 1.433 |
TERT-BUTYL(DICHLOROMETHYL)DIMETHYLSILANE - Risk and Safety
Hazard Symbols | F - Flammable
|
Risk Codes | 11 - Highly Flammable
|
Safety Description | 16 - Keep away from sources of ignition.
|
UN IDs | UN 1325 4.1/PG 2 |
WGK Germany | 3 |
TSCA | No |
TERT-BUTYL(DICHLOROMETHYL)DIMETHYLSILANE - Introduction
tert-Butyl (dichloromethyl) dimethylsilane, chemical formula [(CH3)2Si(CH2Cl)2], commonly known as tert-butyldimethylchlorosilane, is an organosilicon compound.
Properties: tert-butyl (dichloromethyl) dimethylsilane is a colorless liquid with a pungent odor. It is a flammable liquid whose combustion produces toxic gases. It is insoluble in water, but soluble in many organic solvents such as alcohols and ethers.
Uses: tert-butyl (dichloromethyl) dimethyl silane is commonly used as a reagent and crosslinking agent in organic synthesis. It can be used to synthesize polysiloxane materials, used in coatings, sealants, adhesives and other fields. In addition, it can also be used as a surfactant, an industrial lubricant, and a catalyst for acid-catalyzed reactions.
preparation method: tert-butyl (dichloromethyl) dimethyl silane is mainly prepared by reacting silane with dichloromethane, and the reaction conditions need to be controlled well.
Safety Information: Tert-butyl (dichloromethyl) dimethylsilane is irritating and corrosive, and can cause eye, skin and respiratory tract irritation. Wear suitable protective equipment such as gloves, goggles, and respiratory protection when using tert-butyl (dichloromethyl) dimethylsilane. Pay attention to fire prevention and avoid contact with strong oxidants during storage and handling. In industrial use, should follow the relevant safety procedures, and adequate ventilation. If contact with skin or eyes occurs, rinse immediately with plenty of water and seek medical assistance. In case of ingestion or inhalation, seek immediate medical assistance.
Please follow the appropriate safety procedures when using or handling the chemical and pay attention to the correct storage method.
Last Update:2024-04-10 22:29:15