TRANS-3-HEPTENE - Names and Identifiers
TRANS-3-HEPTENE - Physico-chemical Properties
| Molecular Formula | C7H14
|
| Molar Mass | 98.19 |
| Density | 0.702 g/mL at 20 °C(lit.) |
| Melting Point | −137-−136.6 °C(lit.) |
| Boling Point | 95-96 °C(lit.) |
| Flash Point | 21 °F |
| Storage Condition | 2-8°C |
| Refractive Index | n20/D 1.405 |
| Physical and Chemical Properties | EPA Chemical Information 3-Heptene, (E)- (14686-14-7) |
TRANS-3-HEPTENE - Risk and Safety
| Risk Codes | R11 - Highly Flammable
R65 - Harmful: May cause lung damage if swallowed
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
| Safety Description | S16 - Keep away from sources of ignition.
S62 - If swallowed, do not induce vomitting; seek medical advice immediately and show this container or label.
S36 - Wear suitable protective clothing.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
| UN IDs | UN 3295 3/PG 2 |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 10-23 |
| Hazard Class | 3.1 |
| Packing Group | II |
TRANS-3-HEPTENE - Upstream Downstream Industry
TRANS-3-HEPTENE - Introduction
TRANS-3-HEPTENE is a hydrocarbon compound with a chemical formula of C7H14 and a structural formula of CH3CH = CHCH2CH2CH2CH3. It is a colorless liquid with a special smell. The following is a description of the nature, use, preparation and safety information of the TRANS-3-HEPTENE:
Nature:
- TRANS-3-HEPTENE is a water-insoluble liquid with a low vapor pressure at room temperature.
-It is soluble in non-polar solvents, such as petroleum ether and benzene, but almost insoluble in polar solvents, such as water and alcohol.
-The density of the TRANS-3-HEPTENE is relatively high, the boiling point is 99-102 ° C, and the ignition point is -9 ° C.
Use:
- TRANS-3-HEPTENE are often used as important intermediates in organic synthesis.
-It can be used to synthesize biologically active compounds, such as medicines, pesticides and spices.
- TRANS-3-HEPTENE can also be used as a raw material for lubricants and detergents.
Method:
- TRANS-3-HEPTENE can be prepared by a variety of methods, one of which is commonly used by acid-catalyzed isomerization of butyraldehyde.
-In the reaction, butyraldehyde undergoes intramolecular rearrangement under the catalysis of acid to generate TRANS-3-HEPTENE.
Safety Information:
- TRANS-3-HEPTENE on the skin, eyes and mucous membranes irritant, need to pay attention to protection.
-It is a flammable liquid and should be kept away from open flames and high temperatures.
-Good ventilation conditions should be maintained during use to prevent the accumulation of vapor.
Last Update：2024-04-09 19:05:54