TRIISOPROPYLDIMETHYLAMINOSILANE
N,N-dimethyltriisopropylsilylamine
CAS: 181231-66-3
Molecular Formula: C11H27NSi
TRIISOPROPYLDIMETHYLAMINOSILANE - Names and Identifiers
| Name | N,N-dimethyltriisopropylsilylamine |
| Synonyms | TRIISOPROPYLDIMETHYLAMINOSILANE triisopropyldimethylsminosilane N,N-dimethyltriisopropylsilylamine (DIMETHYLAMINO)TRIISOPROPYLSILANE 96 N-methyl-N-tri(propan-2-yl)silylmethanamine N,N-Dimethyl-1,1,1-tris(1-methylethyl)silanamine N,N-dimethyl-1,1,1-tris(1-methylethyl)silanamine |
| CAS | 181231-66-3 |
| InChI | InChI=1/C11H27NSi/c1-9(2)13(10(3)4,11(5)6)12(7)8/h9-11H,1-8H3 |
TRIISOPROPYLDIMETHYLAMINOSILANE - Physico-chemical Properties
| Molecular Formula | C11H27NSi |
| Molar Mass | 201.42 |
| Density | 0.833g/mLat 25°C(lit.) |
| Melting Point | 27-30°C(lit.) |
| Boling Point | 76-78°C8mm Hg(lit.) |
| Flash Point | 67°C |
| Vapor Presure | 0.0585mmHg at 25°C |
| Appearance | solid |
| Specific Gravity | 0.833 |
| Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
| Refractive Index | n20/D 1.451(lit.) |
TRIISOPROPYLDIMETHYLAMINOSILANE - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 10-21 |
TRIISOPROPYLDIMETHYLAMINOSILANE - Introduction
N,N-dimethyltriisopropylsilylamine, also known as TMIS, chemical formula [(CH3)2N] 3sic3h7, is an organic silicon compound. The following is a description of its nature, use, preparation and safety information:
Nature:
1. Appearance: TMIS is colorless to yellowish liquid.
2. Melting point:-85 ° C.
3. Boiling Point: 157 ° C.
4. Density: about 0.81 g/cm.
5. Solubility: TMIS has good solubility in organic solvents, such as ether, toluene, Silicon hexachloride, etc.
Use:
1. TMIS is a commonly used organic silicon compound, which can be used to prepare materials such as silica gel and silicone oil.
2. Due to its high-dose antibacterial properties, TMIS can also be used for fungicides, preservatives and other applications.
3. TMIS can also be used as an additive for materials such as silicon copper batteries.
4. Special chemical properties make TMIS as catalyst carrier and active group in some Catalyst reactions.
Method:
TMIS can be prepared by the reaction of dimethylamine and silicon trichloride. Among them, dimethylamine reacts with silicon trichloride under alkaline conditions to generate TMIS, accompanied by the generation of hydrogen chloride.
Safety Information:
1. TMIS is irritating and corrosive. Contact with skin and eyes may cause eye and skin irritation. Direct contact should be avoided.
2. In the use of the process, need to wear appropriate personal protective equipment, such as goggles, anti-corrosion gloves.
3. Storage, TMIS should be stored in a closed container, away from fire and heat sources, to prevent its volatile and burning.
4. If TMIS is inhaled, move to fresh air immediately and seek medical assistance if necessary.
Please note that when using TMIS, you should follow the safe operation procedures of chemicals to ensure personal safety and environmental protection.
Nature:
1. Appearance: TMIS is colorless to yellowish liquid.
2. Melting point:-85 ° C.
3. Boiling Point: 157 ° C.
4. Density: about 0.81 g/cm.
5. Solubility: TMIS has good solubility in organic solvents, such as ether, toluene, Silicon hexachloride, etc.
Use:
1. TMIS is a commonly used organic silicon compound, which can be used to prepare materials such as silica gel and silicone oil.
2. Due to its high-dose antibacterial properties, TMIS can also be used for fungicides, preservatives and other applications.
3. TMIS can also be used as an additive for materials such as silicon copper batteries.
4. Special chemical properties make TMIS as catalyst carrier and active group in some Catalyst reactions.
Method:
TMIS can be prepared by the reaction of dimethylamine and silicon trichloride. Among them, dimethylamine reacts with silicon trichloride under alkaline conditions to generate TMIS, accompanied by the generation of hydrogen chloride.
Safety Information:
1. TMIS is irritating and corrosive. Contact with skin and eyes may cause eye and skin irritation. Direct contact should be avoided.
2. In the use of the process, need to wear appropriate personal protective equipment, such as goggles, anti-corrosion gloves.
3. Storage, TMIS should be stored in a closed container, away from fire and heat sources, to prevent its volatile and burning.
4. If TMIS is inhaled, move to fresh air immediately and seek medical assistance if necessary.
Please note that when using TMIS, you should follow the safe operation procedures of chemicals to ensure personal safety and environmental protection.
Last Update：2024-04-10 22:29:15
