Trichloro(2-chloroethyl)silaneChloro(3-chloro-2-methylpropyl)dimethylsilane
chloro(3-chloro-2-methylpropyl)dimethylsilane
CAS: 18145-83-0
Molecular Formula: C6H14Cl2Si
Trichloro(2-chloroethyl)silaneChloro(3-chloro-2-methylpropyl)dimethylsilane - Names and Identifiers
| Name | chloro(3-chloro-2-methylpropyl)dimethylsilane |
| Synonyms | Einecs 242-030-9 (Chloroisobutyl)dimethylchlorosilane 3-CHLOROISOBUTYLDIMETHYLCHLOROSILANE chloro(3-chloro-2-methylpropyl)dimethylsilane Silane, chloro(3-chloro-2-methylpropyl)dimethyl- Trichloro(2-chloroethyl)silaneChloro(3-chloro-2-methylpropyl)dimethylsilane |
| CAS | 18145-83-0 |
| EINECS | 242-030-9 |
| InChI | InChI=1/C6H14Cl2Si/c1-6(4-7)5-9(2,3)8/h6H,4-5H2,1-3H3 |
Trichloro(2-chloroethyl)silaneChloro(3-chloro-2-methylpropyl)dimethylsilane - Physico-chemical Properties
| Molecular Formula | C6H14Cl2Si |
| Molar Mass | 185.17 |
| Density | 1,03 g/cm3 |
| Boling Point | 88°C 25mm |
| Flash Point | 60°C |
| Vapor Presure | 1.05mmHg at 25°C |
| Specific Gravity | 1.030 |
| Storage Condition | RT, sealed, dry |
| Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
| Refractive Index | 1.4522 |
Trichloro(2-chloroethyl)silaneChloro(3-chloro-2-methylpropyl)dimethylsilane - Risk and Safety
| TSCA | Yes |
Trichloro(2-chloroethyl)silaneChloro(3-chloro-2-methylpropyl)dimethylsilane - Introduction
chloro(3-chloro-2-methylpropyl)dimethylsilane, with the formula Cl(CH3)2Si(CH3)Cl(C4H9), is also known as isobutylchlorosilane. The following is an introduction to its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 190.72g/mol
-Boiling point: 70-71 ° C
-Density: 0.94g/cm³
-Melting point:-104 ° C
-Solubility: Soluble in organic solvents, insoluble in water
Use:
-as an intermediate in Organic Synthesis: chloro(3-chloro-2-methylpropyl)dimethylsilane is commonly used in silane protecting groups, coupling reagents and catalysts in organic synthesis reactions.
-Used for Polymer Modification: It can be used as a polymer modifier to change the properties of the polymer surface to make it have special adhesion or anti-adhesion.
-for surface modification: chloro(3-chloro-2-methylpropyl)dimethylsilane can be used to modify the surface of glass, ceramics, metals, etc., to improve its wettability, water resistance and corrosion resistance.
Method:
- chloro(3-chloro-2-methylpropyl)dimethylsilane can be prepared by the reaction of chloromethylsilane and isobutylene under the action of aluminum chloride catalyst.
Safety Information:
-Choro (3-choro-2-methylpropyl) dimethylsilane should be careful to avoid contact with skin, eyes and mucous membranes, and avoid inhalation or ingestion.
-When using, wear protective glasses and gloves to ensure that the operation is carried out in a well-ventilated place.
-In case of inapplicability, it is recommended to use under the guidance of chemical professionals.
-During use and storage, avoid exposure to fire or high temperature, and avoid contact with oxidants.
-In the event of accidental exposure or poisoning, seek immediate medical attention and provide relevant product information.
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 190.72g/mol
-Boiling point: 70-71 ° C
-Density: 0.94g/cm³
-Melting point:-104 ° C
-Solubility: Soluble in organic solvents, insoluble in water
Use:
-as an intermediate in Organic Synthesis: chloro(3-chloro-2-methylpropyl)dimethylsilane is commonly used in silane protecting groups, coupling reagents and catalysts in organic synthesis reactions.
-Used for Polymer Modification: It can be used as a polymer modifier to change the properties of the polymer surface to make it have special adhesion or anti-adhesion.
-for surface modification: chloro(3-chloro-2-methylpropyl)dimethylsilane can be used to modify the surface of glass, ceramics, metals, etc., to improve its wettability, water resistance and corrosion resistance.
Method:
- chloro(3-chloro-2-methylpropyl)dimethylsilane can be prepared by the reaction of chloromethylsilane and isobutylene under the action of aluminum chloride catalyst.
Safety Information:
-Choro (3-choro-2-methylpropyl) dimethylsilane should be careful to avoid contact with skin, eyes and mucous membranes, and avoid inhalation or ingestion.
-When using, wear protective glasses and gloves to ensure that the operation is carried out in a well-ventilated place.
-In case of inapplicability, it is recommended to use under the guidance of chemical professionals.
-During use and storage, avoid exposure to fire or high temperature, and avoid contact with oxidants.
-In the event of accidental exposure or poisoning, seek immediate medical attention and provide relevant product information.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: 3-CHLOROISOBUTYLDIMETHYLCHLOROSILANE Visit Supplier Webpage Request for quotation
CAS: 18145-83-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 18145-83-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 3-CHLOROISOBUTYLDIMETHYLCHLOROSILANE Visit Supplier Webpage Request for quotation
CAS: 18145-83-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 18145-83-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History