Tris(2,2,2-trifluoroethyl)borate - Names and Identifiers
Name | Tris(2,2,2-trifluoroethyl)borate
|
Synonyms | Sheppard Reagent Sheppard Amidation Reagent TRIS(TRIFLUOROETHYL)BORATE Tris(2,2,2-trifluoroethyl)borate Tris(2,2,2-trifluoroethoxy)boron TRIS(2,2,2-TRIFLUOROETHYL) BORATE Tris(2,2,2-trifluoroethoxy)borane
|
CAS | 659-18-7
|
Tris(2,2,2-trifluoroethyl)borate - Physico-chemical Properties
Molecular Formula | C6H6BF9O3
|
Molar Mass | 307.91 |
Density | 1.430 g/mL at 25 °C |
Boling Point | 125°C(lit.) |
Flash Point | 43℃ |
Storage Condition | Room Temprature |
Refractive Index | n/D1.298(lit.) |
Physical and Chemical Properties | EPA Chemical Information Tris(2,2,2-trifluoroethyl) borate (659-18-7) |
Use | Uses Tris (2,2, 2-trifluoroethyl) borate is a useful research chemical for organic synthesis and other chemical processes. |
Tris(2,2,2-trifluoroethyl)borate - Risk and Safety
Risk Codes | 10 - Flammable
|
UN IDs | UN 1993C 3 / PGIII |
WGK Germany | 3 |
Tris(2,2,2-trifluoroethyl)borate - Upstream Downstream Industry
Tris(2,2,2-trifluoroethyl)borate - Introduction
Tris(2,2,2-trifluoroethyl)borate(Tris(2,2,2-trifluoroethyl)borate) is an organic compound with the chemical formula C6H9BF3O3.
Here are the properties of Tris(2,2,2-trifluoroethyl)borate:
-Appearance: Tris(2,2,2-trifluoroethyl)borate is a colorless to pale yellow liquid.
-Melting point: Its melting point range is -60 to -50 degrees Celsius.
-Boiling point: The boiling point range of Tris(2,2,2-trifluoroethyl)borate is 152 to 155 degrees Celsius.
-Solubility: It can be dissolved in common organic solvents, such as ether and carbon disulfide.
Main uses of Tris(2,2,2-trifluoroethyl)borate:
-As a catalyst: Tris(2,2,2-trifluoroethyl)borate can be used as a catalyst for certain catalytic reactions, such as hydroxymethylation reactions (methoxymethylation reaction), carbonyl reduction reactions (carbonyl reduction reaction), etc.
-As a flame retardant: Because Tris(2,2,2-trifluoroethyl)borate contains a flame-retardant trifluoroethyl group in its chemical structure, it can be used as some polymers, coatings and plastics. Additives to flame retardants.
The preparation method of Tris(2,2,2-trifluoroethyl)borate is generally obtained by esterification of boric acid and 2,2, 2-trifluoroethanol, and the reaction needs to be carried out under an inert atmosphere.
There is currently no large amount of relevant data on the safety information of Tris(2,2,2-trifluoroethyl)borate. However, as an organic compound, the following matters should be paid attention to when using:
-Avoid contact with skin and eyes to prevent irritation and damage.
-During use, maintain good ventilation conditions and avoid inhaling gas or steam.
-During operation or storage, avoid contact with oxidants and strong acids to prevent reactions.
-When handling the compound, take appropriate precautions and protective measures, such as wearing chemical protective gloves and goggles.
-If the compound is accidentally ingested or inhaled, seek medical attention immediately.
Last Update:2024-04-10 22:29:15