TungstenoxidePURATREMyellowpowder
Tungsten(VI) oxide
CAS: 1314-35-8;39318-18-8
Molecular Formula: O.W
TungstenoxidePURATREMyellowpowder - Names and Identifiers
| Name | Tungsten(VI) oxide |
| Synonyms | C.I. 77901 Tungstenoxide Tungsten oxide trioxotungsten Tungsten trioxide Tungsten(VI) oxide Tungstenoxideyellowgreenpowder TungstenoxidePURATREMyellowpowder Tungstenoxidesinteredlumpsyellowgreenpieces |
| CAS | 1314-35-8 39318-18-8 |
| EINECS | 254-413-8 |
| InChI | InChI=1/3O.W/rO3W/c1-4(2)3 |
TungstenoxidePURATREMyellowpowder - Physico-chemical Properties
| Molecular Formula | O.W |
| Molar Mass | 199.84 |
| Melting Point | 1470-1475℃ |
| Boling Point | 1750℃ |
| Water Solubility | insoluble |
| Appearance | Yellow to brown powder |
| Storage Condition | Room Temprature |
| Sensitive | Easily absorbing moisture |
| MDL | MFCD00011466 |
| Physical and Chemical Properties | Light yellow powder. melting point 1473 ℃ relative density 7.16 solubility insoluble in water and common inorganic acid, soluble in hot alkali, slightly soluble in hydrofluoric acid. |
| Use | Used in the manufacture of metal tungsten, alloy steel, fire-resistant fabric, etc., and used in the ceramic industry |
TungstenoxidePURATREMyellowpowder - Risk and Safety
| Hazard Symbols | Xn - Harmful |
| Risk Codes | R22 - Harmful if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection |
TungstenoxidePURATREMyellowpowder - Upstream Downstream Industry
| Raw Materials | Sodium hydroxide Ammonia |
| Downstream Products | Phosphotungstic acid |
TungstenoxidePURATREMyellowpowder - Reference
| Reference Show more | 1. [IF=3.361] Yajun Zheng et al."Microscale flower-like magnesium oxide for highly efficient photocatalytic degradation of organic dyes in aqueous solution."Rsc Adv. 2019 Mar;9(13):7338-7348 |
TungstenoxidePURATREMyellowpowder - Introduction
Sensitive to humidity. When heated, the color changes from light to dark to dark orange, and returns to the original color after cold. Soluble in alkali hydroxide solution, slightly soluble in acid, insoluble in water. The minimum lethal dose (rat, oral) is 840mg/kg. It's irritating. It sublimates significantly at 850 ℃ and turns green when melted. It is stable in air, insoluble in water and inorganic acids except hydrofluoric acid, and can slowly dissolve in ammonia and concentrated hot sodium hydroxide solution.
Last Update：2022-10-16 17:13:17
TungstenoxidePURATREMyellowpowder - Introduction
Tungsten(VI) oxide is an inorganic compound with the chemical formula WO3. It is a yellow solid, insoluble in water at room temperature. The following is a description of the nature, use, formulation and safety information of Tungsten(VI) oxide:
Nature:
1. Appearance: Tungsten(VI) oxide is yellow solid, granular or crystalline.
2. Density: its density is about 7.16G/cm3.
3. Melting point and boiling point: The melting point of Tungsten(VI) oxide is about 1473 degrees Celsius, and the boiling point is about 1400 degrees Celsius.
4. Stability: It is a relatively stable compound, which is not easy to react with air, water or most acids at room temperature, but can react with strong bases.
5. Conductivity: Tungsten(VI) oxide shows certain conductivity and can be used in electrolytic cells and electronic devices.
Use:
1. Catalyst: Tungsten(VI) oxide is widely used as catalyst for oxidation reaction, alcohol dehydrogenation, organic synthesis and other important reactions.
2. Pigment: because of its brilliant yellow color, Tungsten(VI) oxide is also often used as a colorant for ceramics, glass, plastics, pigments, etc.
3. Optical applications: in the optical field, Tungsten(VI) oxide can be used to manufacture coatings, filters, infrared reflective materials, etc.
Preparation Method:
There are usually several ways to prepare Tungsten(VI) oxide, the most common are:
1. Direct oxidation method: metal Tungsten is exposed to oxygen at high temperature to make it undergo oxidation reaction to generate Tungsten(VI) oxide.
2. oxide decomposition method: tungstic acid or tungstate is decomposed in a high temperature and reducing atmosphere to obtain Tungsten(VI) oxide.
Safety Information:
Tungsten(VI) oxide is relatively safe under general conditions of use, but the following points need to be paid attention to during processing and preparation:
1. Inhalation or exposure to high concentrations of Tungsten(VI) oxide dust may cause irritation to the respiratory tract, eyes and skin, and appropriate protective measures should be taken.
2. Avoid contact with strong oxidants and strong bases to avoid violent reactions.
3. When dealing with Tungsten(VI) oxide, care should be taken to avoid flying dust to prevent inhalation or explosion.
Before using Tungsten(VI) oxide, it is recommended to take corresponding safety measures according to the specific situation and follow appropriate operating procedures.
Nature:
1. Appearance: Tungsten(VI) oxide is yellow solid, granular or crystalline.
2. Density: its density is about 7.16G/cm3.
3. Melting point and boiling point: The melting point of Tungsten(VI) oxide is about 1473 degrees Celsius, and the boiling point is about 1400 degrees Celsius.
4. Stability: It is a relatively stable compound, which is not easy to react with air, water or most acids at room temperature, but can react with strong bases.
5. Conductivity: Tungsten(VI) oxide shows certain conductivity and can be used in electrolytic cells and electronic devices.
Use:
1. Catalyst: Tungsten(VI) oxide is widely used as catalyst for oxidation reaction, alcohol dehydrogenation, organic synthesis and other important reactions.
2. Pigment: because of its brilliant yellow color, Tungsten(VI) oxide is also often used as a colorant for ceramics, glass, plastics, pigments, etc.
3. Optical applications: in the optical field, Tungsten(VI) oxide can be used to manufacture coatings, filters, infrared reflective materials, etc.
Preparation Method:
There are usually several ways to prepare Tungsten(VI) oxide, the most common are:
1. Direct oxidation method: metal Tungsten is exposed to oxygen at high temperature to make it undergo oxidation reaction to generate Tungsten(VI) oxide.
2. oxide decomposition method: tungstic acid or tungstate is decomposed in a high temperature and reducing atmosphere to obtain Tungsten(VI) oxide.
Safety Information:
Tungsten(VI) oxide is relatively safe under general conditions of use, but the following points need to be paid attention to during processing and preparation:
1. Inhalation or exposure to high concentrations of Tungsten(VI) oxide dust may cause irritation to the respiratory tract, eyes and skin, and appropriate protective measures should be taken.
2. Avoid contact with strong oxidants and strong bases to avoid violent reactions.
3. When dealing with Tungsten(VI) oxide, care should be taken to avoid flying dust to prevent inhalation or explosion.
Before using Tungsten(VI) oxide, it is recommended to take corresponding safety measures according to the specific situation and follow appropriate operating procedures.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: Tungsten(VI) oxide Request for quotationCAS: 1314-35-8
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Spot supply
Product Name: Tungsten(VI) oxide Request for quotationCAS: 1314-35-8
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Product Name: Tungsten(VI) oxide Request for quotation
CAS: 1314-35-8
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 1314-35-8
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Spot supply
Product Name: Tungsten trioxide Visit Supplier Webpage Request for quotationCAS: 1314-35-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: Tungsten(VI) oxide Request for quotationCAS: 1314-35-8
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Spot supply
Product Name: Tungsten(VI) oxide Request for quotationCAS: 1314-35-8
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Product Name: Tungsten(VI) oxide Request for quotation
CAS: 1314-35-8
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 1314-35-8
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Spot supply
Product Name: Tungsten trioxide Visit Supplier Webpage Request for quotationCAS: 1314-35-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
Raw Materials for TungstenoxidePURATREMyellowpowder
Downstream Products for TungstenoxidePURATREMyellowpowder