dichloro(diethenyl)silane - Names and Identifiers
dichloro(diethenyl)silane - Physico-chemical Properties
Molecular Formula | C4H6Cl2Si
|
Molar Mass | 153.08 |
Density | 1,081 g/cm3 |
Boling Point | 118-119°C |
Flash Point | 15°C |
Vapor Presure | 21.2mmHg at 25°C |
Specific Gravity | 1.0813 |
Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
Refractive Index | 1.4509 |
dichloro(diethenyl)silane - Risk and Safety
Risk Codes | R11 - Highly Flammable
R34 - Causes burns
|
Safety Description | S9 - Keep container in a well-ventilated place.
S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | 2985 |
TSCA | No |
dichloro(diethenyl)silane - Introduction
Divinyldichlorosilane (also known as Divinyldichlorosilane, diethyldisilane chloride) is an organosilicon compound. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to light yellow liquid.
-Molecular formula: C4H10Cl2Si.
-Molecular weight: 157.11g/mol.
-Melting point:-55 ℃.
-Boiling point: 153 ℃.
-Density: 1.03g/cm³.
Use:
-As an important intermediate in organic synthesis and polymer chemistry, it can be used to synthesize organosilicon compounds.
-Widely used in the production of silicone rubber and silicone as a crosslinking agent and plasticizer.
-Used as a component of lubricants, sealants, coatings and adhesives.
-In the electronics industry, it can be used to prepare Silicon-based glue, insulating materials and coatings.
Method:
Divinyldichlorosilane can be obtained by the reaction of ethylene olefin with silicon dichloride. The reaction conditions usually require the assistance of solvent and light or heat.
Safety Information:
- Divinyldichlorosilane has a pungent odor and irritates the eyes, skin and respiratory system.
-Avoid skin contact and inhalation during contact, and use appropriate protective measures such as wearing protective gloves, protective glasses and respiratory protective equipment when necessary.
-In case of inhalation or ingestion, please seek medical treatment in time.
-Store sealed and away from fire and oxidant.
-Use should follow the correct operating procedures and proceed in a well-ventilated environment.
Last Update:2024-04-10 22:29:15