nonafluorohexylmethyldichlorosilane - Names and Identifiers
Name | (1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE
|
Synonyms | nonafluorohexylmethyldichlorosilane (1H,1H,2H,2H-PERFLUOROHEXYL)METHYLDICHLOROSILANE (1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE dichloromethyl(3,3,4,4,5,5,6,6,6-nonafluorohexyl)-Silane Dichloro(3,3,4,4,5,5,6,6,6-nonafluorohexyl)(methyl)silane dichloromethyl(3,3,4,4,5,5,6,6,6-nonafluorohexyl)-Silane(1h,1h,2h,2h-perfluorohexyl)methyldichlorosilane
|
CAS | 38436-16-7
|
EINECS | 253-930-6 |
nonafluorohexylmethyldichlorosilane - Physico-chemical Properties
Molecular Formula | C7H7Cl2F9Si
|
Molar Mass | 361.11 |
Density | 1.434±0.06 g/cm3(Predicted) |
Boling Point | 86°C 48mm |
Water Solubility | reacts rapidly with moisture, water, protic solvents |
Storage Condition | Room Temprature |
Refractive Index | 1.356 |
Use | 1H,1H,2H, 2h-perfluorohexylmethyldichlorosilane is a perfluorinated organic compound, which can be used as an important raw material for fluorine-containing intermediates and surfactants and for organic synthesis in scientific experiments. |
nonafluorohexylmethyldichlorosilane - Risk and Safety
Risk Codes | R10 - Flammable
R34 - Causes burns
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | Corrosive/Flammable |
nonafluorohexylmethyldichlorosilane - Introduction
(1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE, the chemical formula is C7H12Cl2F9Si, is an organosilicon compound containing nine fluorine atoms. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance:(1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE is a colorless to pale yellow liquid.
-Molecular weight: 353.15g/mol.
-Melting point:-58°C.
-Boiling point: about 160°C.
-Density: 1.57g/cm³.
-Solubility: Soluble in common organic solvents.
Use:
- (1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE are often used as wetting agents and degreases with surface active properties.
-It can also be used as a catalyst for polymer chemical reactions or a basic component of composite materials.
- (1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE can also be used in the electronics industry to improve the adhesion of electronic components.
Preparation Method:
- (1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE are generally prepared by organic synthetic chemical reactions. The specific reaction conditions and procedures can be controlled in a chemical laboratory.
Safety Information:
- (1H,1H,2H,2H-PERFLUORO-N-HEXYL)METHYLDICHLORO-SILANE are organic silicon compounds, and care should be taken to avoid contact with skin, eyes and respiratory system. Appropriate personal protective equipment should be worn during use.
-During storage and transportation, it should be kept in a dry, low temperature, well-ventilated place, away from fire and oxidizing agents.
-In case of leakage, appropriate protective measures should be taken as soon as possible and waste should be properly disposed. When handling or disposing, refer to the relevant local laws and regulations, and follow the correct disposal procedures.
Last Update:2024-04-10 22:29:15