opp-g - Names and Identifiers
Name | 2-Biphenylyl glycidyl ether
|
Synonyms | opp-g o-Phenylphenolglycidylether 2-Biphenylyl glycidyl ether 3-(2-xenyloxy)propylene oxide ortho-phenylphenolglycidylether 1-(Biphenyloxy)-2,3-epoxypropane 3-(2-biphenyloxy)propylene oxide Propane, 1,2-epoxy-3-(2-xenolyl)- biphenyl-2-yl 2,3-epoxypropyl ether 2-[(biphenyl-2-yloxy)methyl]oxirane 3-(2-Biphenylyloxy)-1,2-epoxypropane 1-(2-biphenylyloxy)-2,3-epoxy-propan Propane, 1-(2-biphenylyloxy)-2,3-epoxy- (((1,1'-Biphenyl)-2-yloxy)methyl)oxirane (2R)-2-[(biphenyl-2-yloxy)methyl]oxirane (2S)-2-[(biphenyl-2-yloxy)methyl]oxirane 2-((1,1'-biphenyl-2-yloxy)methyl)-oxiran Oxirane, [([1,1'-biphenyl]-2-yloxy)methyl]-
|
CAS | 7144-65-2
|
EINECS | 230-451-0 |
InChI | InChI=1/C15H14O2/c1-2-6-12(7-3-1)14-8-4-5-9-15(14)17-11-13-10-16-13/h1-9,13H,10-11H2/t13-/m1/s1 |
opp-g - Physico-chemical Properties
Molecular Formula | C15H14O2
|
Molar Mass | 226.27 |
Density | 1.0891 (rough estimate) |
Melting Point | 31°C |
Boling Point | 200°C/13mmHg(lit.) |
Flash Point | 137.3°C |
Vapor Presure | 2.28E-05mmHg at 25°C |
Storage Condition | -20°C |
Refractive Index | 1.6530 (estimate) |
opp-g - Risk and Safety
Hazard Symbols | Xn - Harmful
|
Risk Codes | 22 - Harmful if swallowed
|
Safety Description | S24/25 - Avoid contact with skin and eyes.
|
RTECS | RR0356000 |
opp-g - Introduction
2-Biphenylyl glycidyl ether(2-Biphenylyl glycidyl ether) is an organic compound with the formula C15H12O2. The following is a description of its nature, use, preparation and safety information:
Nature:
1. Appearance: 2-Biphenylyl glycidyl ether is a colorless or slightly yellow liquid.
2. melting point: about 14-18 ℃.
3. Boiling point: about 320-330 ℃.
4. density: about 1.115 g/cm.
5. Solubility: Soluble in some common organic solvents, such as toluene, dichloromethane, etc.
Use:
2-Biphenylyl glycidyl ether has certain application value in the chemical industry, and is often used as a reagent and intermediate in organic synthesis.
1. as a glass fiber reinforced resin film forming agent.
2. Used to formulate photosensitive polymers, prepare photoresist and photocurable coating materials.
Preparation Method:
2-Biphenylyl glycidyl ether can be obtained by reacting phenol with bromobenzene in the presence of sodium carbonate to obtain phenylphenol, and then aromatic epoxidation reaction with oxygen to generate 2-Biphenylyl glycidyl ether. The specific preparation method is as follows:
1. Phenol is reacted with sodium carbonate in a solvent (such as dichloromethane) to obtain phenylphenol.
2. Epoxidation of phenylphenol with oxygen under alkaline conditions to generate 2-Biphenylyl glycidyl ether.
3. The pure product can be obtained by distillation or other separation and purification methods.
Safety Information:
2-Biphenylyl glycidyl ether has no obvious toxicity and irritation under normal conditions of use. However, as an organic compound, the following safety measures should be paid attention to during use or preparation:
1. avoid contact with skin, eyes and respiratory tract, use should wear chemical protective gloves, goggles and appropriate protective mask.
2. use should ensure that the operating area is well ventilated, avoid inhalation of its steam.
3. Store away from fire and oxidant, store in a cool, dry place, avoid contact with air and light.
4. In case of accidental inhalation, ingestion or skin contact, rinse immediately with water and seek medical help.
Last Update:2024-04-10 22:29:15