oro-N,N-bis(trimethyL - Names and Identifiers
oro-N,N-bis(trimethyL - Physico-chemical Properties
Molecular Formula | C12H22ClNSi2
|
Molar Mass | 271.93 |
Density | 0.981g/mLat 25°C(lit.) |
Boling Point | 85°C0.4mm Hg(lit.) |
Flash Point | 219°F |
Vapor Presure | 0.00289mmHg at 25°C |
Specific Gravity | 1.103 |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | n20/D 1.5(lit.) |
oro-N,N-bis(trimethyL - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37/39 - Wear suitable gloves and eye/face protection
|
WGK Germany | 3 |
oro-N,N-bis(trimethyL - Introduction
3-choro-N, N-bis(trimethylsilyl)aniline is an organic compound with the chemical formula C12H19ClN2Si2. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: colorless or light yellow crystal or liquid
-Molecular weight: 280.88g/mol
-Melting point: 59-61 ℃
-Boiling point: 160-162 ℃ (at 0.1mmHg)
Use:
-3-choro-N, N-bis(trimethylsilyl)aniline can be used as reducing agents, catalysts and reagents in organic synthesis reactions.
-is an important raw material for the synthesis of organic compounds and pharmaceutical intermediates.
Preparation Method:
3-choro-N can be synthesized by the following steps, N-bis(trimethylsilyl)aniline:
1. In an appropriate solvent, chloramine reacts with trimethylchlorosilane to generate the corresponding chlorosilylamine compound.
2. The chlorosilylamine compound is reacted with a second amine that can provide 2 nitrogen atoms to generate the target compound.
Safety Information:
-3-choro-N, N-bis(trimethylsilyl)aniline is an organic compound and is potentially dangerous and should be operated under the guidance of a chemical laboratory or professional.
-This compound may be irritating to the eyes, skin and respiratory tract. Please be careful to avoid contact or inhalation.
-Appropriate precautions should be taken during handling and storage.
-Further safety information (such as storage conditions and handling methods) can be obtained from the supplier or relevant technical manuals.
Last Update:2024-04-09 15:17:59