p-(t-Bbutyldimethylsiloxy)styrene - Names and Identifiers
p-(t-Bbutyldimethylsiloxy)styrene - Physico-chemical Properties
Molecular Formula | C14H22OSi
|
Molar Mass | 234.41 |
Density | 0.91g/cm3 |
Boling Point | 80 °C |
Flash Point | 111.258°C |
Vapor Presure | 0.015mmHg at 25°C |
Specific Gravity | 0.922 |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.5091 |
p-(t-Bbutyldimethylsiloxy)styrene - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
TSCA | No |
p-(t-Bbutyldimethylsiloxy)styrene - Introduction
p-vinylphenoxy tert-butyldimethylsilane, chemical formula C14H22OSi, is an organic compound. The following describes the properties, uses, preparation and safety information of the compound.
Nature:
-Appearance: colorless to slightly yellow liquid
-Molecular weight: 234.41g/mol
-Boiling point: about 240-250°C
-Melting point: about -30°C
-Density: about 0.966 g/mL
-Solubility: Soluble in some common organic solvents such as ether, chloroform and dimethylformamide
Use:
p-Vinylphenoxy tert-butyldimethylsilane is commonly used in organic synthesis as a reagent, intermediate or functional monomer. It can be used to prepare polymers by polymerization, and can also be used as a precursor for functional materials. Its unique structure gives it potential applications in areas such as self-assembly and surface modification.
Preparation Method:
P-(t-Butyldimethylsiloxy)styrene can be prepared by a condensation reaction between p-vinylbenzene and tert-butyldimethylsilanol. The reaction is generally carried out under an inert atmosphere by heating the reaction mixture to produce the desired product.
Safety Information:
-Appropriate laboratory safety procedures should be used to avoid contact with skin, eyes and respiratory tract.
-This compound may be toxic to organisms, so use it in accordance with relevant safety guidelines.
-It should be operated in a well-ventilated place to avoid inhaling its volatiles.
-If there is an accidental leak, it should be removed quickly and prevented from entering the water source or drainage system.
Please note that the above information is for reference only, and the specific nature, use, formulation and safety information need to be confirmed in combination with the actual situation and relevant literature. Follow proper laboratory practices and safety guidelines when using this compound.
Last Update:2024-04-10 22:29:15