vinyldimethylfluorosilane - Names and Identifiers
vinyldimethylfluorosilane - Physico-chemical Properties
Molecular Formula | C4H9FSi
|
Molar Mass | 104.2 |
Density | 0,813 g/cm3 |
Boling Point | 43 °C |
Vapor Presure | 336mmHg at 25°C |
Specific Gravity | 0.813 |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.3615 |
vinyldimethylfluorosilane - Risk and Safety
Risk Codes | R11 - Highly Flammable
R34 - Causes burns
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2924 |
TSCA | No |
vinyldimethylfluorosilane - Introduction
ethenyl(fluoro)dimethylsilane is an organic silicon compound, the chemical formula is C4H9FSi. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: colorless transparent liquid
-Boiling point: 44-45 degrees Celsius
-Density: about 0.8 g/ml
-Insoluble in water, soluble in some organic solvents such as ether, benzene and toluene
-Reacts with moisture and humidity in the air to generate toxic gases
Use:
- ethenyl(fluoro)dimethylsilane is commonly used as a reagent in organic synthesis, which can introduce fluorine-containing organic groups
-In organic synthesis, it can be used to synthesize compounds containing vinyl, dimethyl and fluorosilane groups
-Because organosilicon compounds have good thermal stability and chemical resistance, ethenyl(fluoro)dimethylsilane can be used as modifiers for polymer materials
Preparation Method:
- ethenyl(fluoro)dimethylsilane can be prepared by the reaction of ethylene and dimethylfluorosilane
Safety Information:
- ethenyl(fluoro)dimethylsilane are organic halides, which are irritating and damaging. Contact with skin and eyes should be avoided.
-Skin contact may cause irritation and burns, protective gloves and glasses should be worn
-Inhalation or swallowing ethenyl(fluoro)dimethylsilane may cause poisoning, should ensure good ventilation, and avoid inhalation of its vapor during operation
-ethenyl(fluoro)dimethylsilane must be stored and handled properly, and relevant safety procedures and regulations must be observed
Last Update:2024-04-10 22:29:15