zinc,propane - Names and Identifiers
zinc,propane - Physico-chemical Properties
Molecular Formula | C6H14Zn
|
Molar Mass | 151.56536 |
Density | 0.895g/mLat 25°C |
Boling Point | 52 °C(Press: 60 Torr) |
Flash Point | 23°F |
Storage Condition | 2-8°C |
zinc,propane - Risk and Safety
Risk Codes | R11 - Highly Flammable
R14/15 -
R38 - Irritating to the skin
R48/20 -
R63 - Possible risk of harm to the unborn child
R65 - Harmful: May cause lung damage if swallowed
R67 - Vapors may cause drowsiness and dizziness
R34 - Causes burns
R17 - Spontaneously flammable in air
R14 - Reacts violently with water
|
Safety Description | S16 - Keep away from sources of ignition.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S43 - In case of fire use ... (there follows the type of fire-fighting equipment to be used.)
S62 - If swallowed, do not induce vomitting; seek medical advice immediately and show this container or label.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
UN IDs | UN 3399 4.3/PG 2 |
WGK Germany | 3 |
zinc,propane - Introduction
Diisopropylzinc(Diisopropylzinc) is an organic zinc compound with the chemical formula (Zn(C3H7)2). The following is a description of the nature, use, manufacture and safety information of the Diisopropylzinc:
Nature:
-Appearance: Diisopropylzinc is a colorless to yellow liquid with a strong smell.
-Melting Point:-78°C
-Boiling point: 106°C
-Density: 0.877g/cm³
-Solubility: Soluble in common organic solvents, such as ether and disulfide.
Use:
-Catalyst: Diisopropylzinc is commonly used as a precursor for complex catalysts, for example, in organic synthesis to catalyze the reaction between carbene and olefins.
-Chemical reagent: Diisopropylzinc is also an important reagent, often used in complex reactions in organic synthesis, such as Suzuki coupling reactions.
Preparation Method:
Diisopropylzinc are generally prepared by the following steps:
1. first prepare zinc powder and two equivalent isopropyl halogen compounds, such as isopropyl zinc bromide.
2. The zinc powder and isopropyl halogen compound are added to a drying agent such as tetrahydrofuran and reacted to produce Diisopropylzinc.
Safety Information:
- Diisopropylzinc are highly reactive and easily react violently with other compounds, so be careful when operating.
- Diisopropylzinc is a flammable liquid. It will burn when exposed to open fire or high temperature. It should be stored away from the fire source and avoid reacting with oxygen in the air.
- Diisopropylzinc irritant to skin and eyes. Avoid direct contact during operation and ensure operation under good ventilation.
-Wear appropriate personal protective equipment, such as lab gloves and goggles, when using the Diisopropylzinc.
Last Update:2024-04-10 22:29:15