| Name | Plastic antistatic agent |
| Synonyms | Plastic antistatic agent |
| Use | Plastic antistatic agent is a thermoplastic elastomer with polyester as soft segment and polyamide as hard segment. |
Permanent antistatic agent is a thermoplastic elastomer with polyester as the soft segment and polyamide as the hard segment.
Permanent antistatic agent is a fusible additive that is incompatible with polymers, and the conductivity is reduced
It is due to the formation of the conductive network that the best antistatic property can be achieved. High shear force and polymer in the same direction
Sex will hinder the formation of conductive networks. Permanent, non-migrating antistatic agent.
The following data is for reference
|
physical properties |
test conditions |
test standard |
Units |
grades |
|
Surface resistivity |
23c, 50% humidity |
ASTM D257 |
2 x 107 |
|
|
Volume resistivity |
23c, 50% humidity |
ASTM D257 |
3 x 106 |
|
|
Electrostatic decay time |
MIL B- 81705 |
sec |
< 1 |
|
|
Density |
ISO 1183 |
g/cm3 |
1.06 |
|
|
Melting point |
ISO 11357 |
degC |
150 |
|
|
Shore hardness |
Moment |
ISO 868 |
Shore D |
80 |
|
Modulus of elasticity |
ISO 178 |
MPa |
90 |
|
|
Notch Impact Strength |
Gap |
ISO 180 |
J/m |
Do not break |
|
Tensile strength at break |
ISO 527 |
MPa |
36 |
|
|
Tensile rate at break |
ISO 527 |
% |
760 |
|
|
Equilibrium water absorption point |
23c, 50% humidity |
ISO 62 |
% |
1.0 |
|
saturated water absorption |
23c, in water |
ISO 62 |
% |
42 |
|
Refractive index |
23c |
ISO 489 |
- |
1.15 |