Name | Bis(2-ethylhexyl) adipate |
Synonyms | DOA vestinoloa witamol320 wickenol158 WITAMOL 320 Wickenol 158 Witcizer 412 DOA Plasticizer dioctyl hexanedioate Bis(2-ethylhexyl) adipate Bis(2-ethylhexyl)hexanedioate bis(2-ethylhexyl) hexanedioate Adipic acid bis(2-ethylhexyl) ester Adipic acid di(2-ethylhexyl) ester, DOA Plasticizer, DOA |
CAS | 103-23-1 |
EINECS | 203-090-1 |
InChI | InChI=1/C22H42O4/c1-5-9-13-19(7-3)17-25-21(23)15-11-12-16-22(24)26-18-20(8-4)14-10-6-2/h19-20H,5-18H2,1-4H3/t19-,20+ |
Molecular Formula | C22H42O4 |
Molar Mass | 370.57 |
Density | 0.925g/mLat 20°C(lit.) |
Melting Point | -67 °C |
Boling Point | 417 °C |
Flash Point | >230°F |
Water Solubility | immiscible |
Appearance | Liquid |
Specific Gravity | 0.99 |
Color | Clear colorless |
BRN | 1803774 |
PH | 7 (H2O, 20℃) |
Storage Condition | Store below +30°C. |
Stability | Stable. Incompatible with oxidizing agents, water, nitrates. |
Explosive Limit | 0.24%(V) |
Refractive Index | n20/D 1.447(lit.) |
Physical and Chemical Properties | density 0.928 |
Use | It is used as a cold resistant plasticizer for a variety of resins, especially polyvinyl chloride and Vinyl Chloride Copolymer, and can also be used as a raw material for aviation grease |
Risk Codes | R36/38 - Irritating to eyes and skin. R40 - Limited evidence of a carcinogenic effect R39/23/24/25 - R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. R11 - Highly Flammable |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37 - Wear suitable protective clothing and gloves. S16 - Keep away from sources of ignition. S7 - Keep container tightly closed. S24/25 - Avoid contact with skin and eyes. |
UN IDs | UN 1230 3/PG 2 |
WGK Germany | 1 |
RTECS | AU9700000 |
TSCA | Yes |
HS Code | 29171290 |
Hazard Class | 9 |
Packing Group | III |
Toxicity | LD50 orally in Rabbit: > 5000 mg/kg LD50 dermal Rabbit 8410 mg/kg |
LogP | 8.94 at 25℃ |
NIST chemical information | information provided by: webbook.nist.gov (external link) |
(IARC) carcinogen classification | 3 (Vol. Sup 7, 77) 2000 |
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
Application | This product is an excellent cold-resistant plasticizer for polyvinyl chloride, which endows the product with excellent low-temperature flexibility, and has a certain photothermal stability and water resistance. In the plastisol, the initial viscosity is low and the viscosity stability is good. It is often used with main plasticizers such as DOP for cold-resistant agricultural films, electric wires, thin plates, artificial leather, outdoor water pipes and packaging films for frozen foods. It can also be used as a low temperature plasticizer for many synthetic rubbers and a plasticizer for resins such as nitrocellulose and ethyl cellulose. It is used as a stationary liquid for gas chromatography in laboratory work. The toxicity of di (2-ethylhexyl) adipate is very low, the lethal dose to humans is about 500000mg/kg, and the LD50 of oral administration to rats is 3000-6000mg/kg, and the irritation to skin and eyes is also slight. The cold-resistant plasticizer used as a variety of resins, especially polyvinyl chloride and Vinyl Chloride Copolymer, can also be used as a raw material for aviation Grease gas chromatography stationary liquid (maximum use temperature 135 ° C., solvent ether). Plasticizers. Solvent. |
production method | adipic acid and 2-Ethylhexanol were esterified under reduced pressure under sulfuric acid catalysis. Industrial di (2-ethylhexyl) adipate content ≥ 99%. Raw material consumption (kg/t) adipic acid 4152-ethyl hexanol 750 |
category | toxic substances |
toxicity grade | low toxicity |
Acute toxicity | oral-rat LD50: 9110 mg/kg; Oral-mouse LD50:15000 mg/kg |
stimulation data | Skin-rabbit 500 mg mild; Eye-rabbit 500 mg moderate |
flammability hazard characteristics | flammable in open flame, high temperature, strong oxidant; combustion emissions |
storage and transportation characteristics | The warehouse is ventilated and dried at low temperature; Stored separately from food raw materials |
fire extinguishing agent | foam, dry powder, carbon dioxide, sand |
autoignition temperature | 350°C DIN 51794 |
toxic substance data | information provided by: pubchem.ncbi.nlm.nih.gov (external link) |