151412-12-3
2-fluoro-3-(methylbenzyl)bromide
CAS: 151412-12-3
Molecular Formula: C8H8BrF
151412-12-3 - Names and Identifiers
151412-12-3 - Physico-chemical Properties
| Molecular Formula | C8H8BrF |
| Molar Mass | 203.05 |
| Density | 1.456±0.06 g/cm3(Predicted) |
| Boling Point | 142 °C (40 mmHg) |
| Flash Point | 105-106°C/10mm |
| Water Solubility | Insoluble in water. |
| BRN | 7473765 |
| Storage Condition | 2-8°C |
| Sensitive | Lachrymatory |
| Refractive Index | 1.5465-1.5495 |
| MDL | MFCD00042470 |
151412-12-3 - Risk and Safety
| Risk Codes | R34 - Causes burns R51 - Toxic to aquatic organisms R22 - Harmful if swallowed |
| Safety Description | S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| UN IDs | 1760 |
| Hazard Note | Corrosive/Lachrymatory |
| Hazard Class | 8 |
| Packing Group | III |
151412-12-3 - Introduction
2-fluoro-3-(methylbenzyl)bromide is an organic compound with the chemical structure C8H8BrF. The following is a description of its nature, use, preparation and safety information:
Nature:
-Colorless to light yellow liquid in appearance.
-Has a special aromatic smell.
-The melting point is about -12 ° C and the boiling point is about 220 ° C.
-Soluble in organic solvents such as ethanol and ether at room temperature.
Use:
- 2-fluoro-3-(methylbenzyl)bromide can be used as a reagent in organic synthesis.
-It can be used to synthesize organic compounds such as drugs, pesticides and dyes.
-Because of its bactericidal and antibacterial effects, it can also be used as a medicine and preservative.
Method:
The preparation methods of 2-fluoro-3-(methylbenzyl)bromide mainly include the following:
-2-fluoro-3-methylbenzylaldehyde is obtained by reacting benzaldehyde with bromine and sodium fluoride, and then 2-fluoro-3-(methylbenzyl)bromide is obtained by reacting benzaldehyde with hypobromomethane.
-2-fluoro-3-(methylbenzyl)bromide was prepared by the reaction of benzyl bromide and 3-fluoropropionic acid.
Safety Information:
2-fluoro-3-(methylbenzyl)bromide is an organic compound that should be avoided in direct contact with skin, eyes, and esophagus. Wear protective gloves, goggles and protective clothing during operation.
-Avoid contact with oxidants and combustibles during storage and transportation.
-If inhaled or ingested, seek medical attention immediately and provide relevant safety information to the doctor for diagnosis and treatment.
-In the use and disposal of waste, should comply with the relevant safety procedures and regulations.
Please note that this is only an overview and that the specific nature, use, formulation and safety information will need to be further understood and validated on a case-by-case basis for the study or experiment.
Nature:
-Colorless to light yellow liquid in appearance.
-Has a special aromatic smell.
-The melting point is about -12 ° C and the boiling point is about 220 ° C.
-Soluble in organic solvents such as ethanol and ether at room temperature.
Use:
- 2-fluoro-3-(methylbenzyl)bromide can be used as a reagent in organic synthesis.
-It can be used to synthesize organic compounds such as drugs, pesticides and dyes.
-Because of its bactericidal and antibacterial effects, it can also be used as a medicine and preservative.
Method:
The preparation methods of 2-fluoro-3-(methylbenzyl)bromide mainly include the following:
-2-fluoro-3-methylbenzylaldehyde is obtained by reacting benzaldehyde with bromine and sodium fluoride, and then 2-fluoro-3-(methylbenzyl)bromide is obtained by reacting benzaldehyde with hypobromomethane.
-2-fluoro-3-(methylbenzyl)bromide was prepared by the reaction of benzyl bromide and 3-fluoropropionic acid.
Safety Information:
2-fluoro-3-(methylbenzyl)bromide is an organic compound that should be avoided in direct contact with skin, eyes, and esophagus. Wear protective gloves, goggles and protective clothing during operation.
-Avoid contact with oxidants and combustibles during storage and transportation.
-If inhaled or ingested, seek medical attention immediately and provide relevant safety information to the doctor for diagnosis and treatment.
-In the use and disposal of waste, should comply with the relevant safety procedures and regulations.
Please note that this is only an overview and that the specific nature, use, formulation and safety information will need to be further understood and validated on a case-by-case basis for the study or experiment.
Last Update：2024-04-09 15:17:52
Supplier List
Spot supply
Product Name: 1-(Bromomethyl)-2-fluoro-3-methylbenzene Request for quotationCAS: 151412-12-3
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Spot supply
Product Name: 2-Fluoro-3-methylbenzyl bromide Visit Supplier Webpage Request for quotationCAS: 151412-12-3
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Product Name: 2-Fluoro-3-Methylbenzyl Bromide Visit Supplier Webpage Request for quotation
CAS: 151412-12-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 151412-12-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Spot supply
Product Name: 1-(Bromomethyl)-2-fluoro-3-methylbenzene Request for quotationCAS: 151412-12-3
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Spot supply
Product Name: 2-Fluoro-3-methylbenzyl bromide Visit Supplier Webpage Request for quotationCAS: 151412-12-3
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Product Name: 2-Fluoro-3-Methylbenzyl Bromide Visit Supplier Webpage Request for quotation
CAS: 151412-12-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 151412-12-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History