41481-66-7
Bis(3-allyl-4-hydroxyphenyl)sulfone
CAS: 41481-66-7
Molecular Formula: C18H18O4S
41481-66-7 - Names and Identifiers
41481-66-7 - Physico-chemical Properties
| Molecular Formula | C18H18O4S |
| Molar Mass | 330.4 |
| Density | 1.253±0.06 g/cm3(Predicted) |
| Melting Point | 138.5 °C(Solv: toluene (108-88-3)) |
| Boling Point | 544.5±50.0 °C(Predicted) |
| pKa | 7.22±0.20(Predicted) |
| Storage Condition | 2-8℃ |
| Physical and Chemical Properties | EPA Chemical Information Phenol, 4,4 '-sulfonylbis[2-(2-propenyl)- (41481-66-7) |
41481-66-7 - Risk and Safety
| Risk Codes | R43 - May cause sensitization by skin contact R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S24 - Avoid contact with skin. S37 - Wear suitable gloves. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
41481-66-7 - Upstream Downstream Industry
| Raw Materials | 1-Prop-2-enoxy-4-(4-prop-2-enoxyphenyl)sulfonyl-benzene ALLYL TOLUENE-4-SULFONATE Allyl chloride Bis(4-hydroxyphenyl) Sulfone |
41481-66-7 - Introduction
Bis(3-allyl-4-hydroxyphenyl)sulfone(Bis(3-allyl-4-hydroxyphenyl)sulfone) is an organic compound. The following is a description of the nature, use, formulation and safety information of BAS:
Nature:
-Appearance: BAS is a colorless to yellowish crystalline solid.
-Solubility: BAS has good solubility in non-polar solvents, such as xylene, toluene, etc., but has low solubility in water.
-Melting point: Its melting point is about 240-245°C.
-Stability: BAS has good heat resistance and can withstand high temperature conditions.
Use:
- BAS has a wide range of applications in the synthesis of polymer materials. It can be used as a crosslinking agent for the synthesis of thermoplastic polymer materials, epoxy resins, and precursors for the preparation of high-performance polyethersulfone, polyimide and other materials. The addition of BAS can improve the mechanical properties, heat resistance and weather resistance of these materials, making them have a wider range of applications, such as aerospace, automotive manufacturing, electronic devices, etc.
Method: The preparation of
- BAS is generally obtained by reacting aromatic sulfonyl chloride with allyl alcohol. The specific steps include reacting aromatic sulfonyl chloride with allyl alcohol under acidic conditions to generate an intermediate, which is then hydrolyzed, separated and purified to obtain the target product.
Safety Information:
- BAS is a chemical that requires compliance with appropriate safety procedures when used.
-It may be irritating to the eyes and skin, so care should be taken to avoid contact with the skin and eyes during use.
-Always wear personal protective equipment such as chemical goggles, gloves, and lab clothes when operating.
-Avoid inhaling the dust or fumes of the solution, so good ventilation conditions should be provided during operation.
-Lack of research on other potential risks, so care should be taken to prevent potential hazards and avoid excessive exposure.
When using or handling this chemical, please carefully read and follow the relevant safety information and operating guidelines, and follow the relevant laws and regulations. It is recommended to consult a professional if necessary.
Nature:
-Appearance: BAS is a colorless to yellowish crystalline solid.
-Solubility: BAS has good solubility in non-polar solvents, such as xylene, toluene, etc., but has low solubility in water.
-Melting point: Its melting point is about 240-245°C.
-Stability: BAS has good heat resistance and can withstand high temperature conditions.
Use:
- BAS has a wide range of applications in the synthesis of polymer materials. It can be used as a crosslinking agent for the synthesis of thermoplastic polymer materials, epoxy resins, and precursors for the preparation of high-performance polyethersulfone, polyimide and other materials. The addition of BAS can improve the mechanical properties, heat resistance and weather resistance of these materials, making them have a wider range of applications, such as aerospace, automotive manufacturing, electronic devices, etc.
Method: The preparation of
- BAS is generally obtained by reacting aromatic sulfonyl chloride with allyl alcohol. The specific steps include reacting aromatic sulfonyl chloride with allyl alcohol under acidic conditions to generate an intermediate, which is then hydrolyzed, separated and purified to obtain the target product.
Safety Information:
- BAS is a chemical that requires compliance with appropriate safety procedures when used.
-It may be irritating to the eyes and skin, so care should be taken to avoid contact with the skin and eyes during use.
-Always wear personal protective equipment such as chemical goggles, gloves, and lab clothes when operating.
-Avoid inhaling the dust or fumes of the solution, so good ventilation conditions should be provided during operation.
-Lack of research on other potential risks, so care should be taken to prevent potential hazards and avoid excessive exposure.
When using or handling this chemical, please carefully read and follow the relevant safety information and operating guidelines, and follow the relevant laws and regulations. It is recommended to consult a professional if necessary.
Last Update：2024-04-09 20:49:11
Supplier List
Featured ProductsSpot supply
Product Name: Bis(3-allyl-4-hydroxyphenyl)sulfone Visit Supplier Webpage Request for quotationCAS: 41481-66-7
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: Bis(3-allyl-4-hydroxyphenyl)sulfone Request for quotationCAS: 41481-66-7
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Spot supply
Product Name: Phenol44'-sulfonyl bis2-(2-propenyl)- Visit Supplier Webpage Request for quotationCAS: 41481-66-7
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Product Name: Bis(3-allyl-4-hydroxyphenyl)sulfone Visit Supplier Webpage Request for quotation
CAS: 41481-66-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 41481-66-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Featured ProductsSpot supply
Product Name: Bis(3-allyl-4-hydroxyphenyl)sulfone Visit Supplier Webpage Request for quotationCAS: 41481-66-7
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: Bis(3-allyl-4-hydroxyphenyl)sulfone Request for quotationCAS: 41481-66-7
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Spot supply
Product Name: Phenol44'-sulfonyl bis2-(2-propenyl)- Visit Supplier Webpage Request for quotationCAS: 41481-66-7
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Product Name: Bis(3-allyl-4-hydroxyphenyl)sulfone Visit Supplier Webpage Request for quotation
CAS: 41481-66-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 41481-66-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History
Raw Materials for 41481-66-7
1-Prop-2-enoxy-4-(4-prop-2-enoxyphenyl)sulfonyl-benzene
ALLYL TOLUENE-4-SULFONATE
Allyl chloride
Bis(4-hydroxyphenyl) Sulfone
ALLYL TOLUENE-4-SULFONATE
Allyl chloride
Bis(4-hydroxyphenyl) Sulfone