2,6-Dichloro-4-fluoroaniline - Names and Identifiers
2,6-Dichloro-4-fluoroaniline - Physico-chemical Properties
Molecular Formula | C6H4Cl2FN
|
Molar Mass | 180.01 |
Density | 1.502 |
Melting Point | 53-55°C |
Boling Point | 216℃ |
Flash Point | 85℃ |
Water Solubility | Insoluble in water. |
Appearance | powder to crystal |
Color | White to Brown |
BRN | 2718192 |
pKa | 0.77±0.10(Predicted) |
Storage Condition | under inert gas (nitrogen or Argon) at 2–8 °C |
2,6-Dichloro-4-fluoroaniline - Risk and Safety
Hazard Symbols | T - Toxic

|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | UN2811 |
Hazard Note | Toxic |
Hazard Class | 6.1 |
Packing Group | III |
2,6-Dichloro-4-fluoroaniline - Introduction
2,6-Dichloro-4-fluoroaniline is an organic compound with the chemical formula C6H3Cl2FN. The following is its nature, use, preparation and safety information:
Nature:
-Appearance: 2,6-Dichloroo-4-fluoroaniline is a pale yellow crystal.
-Melting point: about 67-69 ℃.
-Boiling point: about 268 ℃.
-Density: about 1.7g/cm³.
-Solubility: Soluble in organic solvents, such as ethanol, dimethylformamide and dichloromethane.
Use:
- 2,6-Dichloro-4-fluoroaniline is an important synthetic intermediate, commonly used in organic synthesis reactions.
-It can be used as a building block for organic light-emitting materials.
-can also be used in the field of dyes and medicine.
Preparation Method:
2,6-Dichloro-4-fluoroaniline can be obtained by substitution reaction with protonic acid after fluorination of aniline. The steps and conditions of the specific chemical reaction can be adjusted according to the experimental requirements.
Safety Information:
- 2,6-Dichloro-4-fluoroaniline is an organic compound with certain toxicity. Entry into the body or contact with the skin can cause irritation and damage.
-Wear appropriate personal protective equipment when using, including protective gloves, goggles and a protective mask.
-Experiments or operations should be carried out in a well-ventilated environment.
-If exposed to the compound, immediately flush the affected area with plenty of water and seek medical help.
Please note that for specific chemical synthesis and safe operation, always refer to relevant safety literature and professional guidance.
Last Update:2024-04-09 15:17:56