2689-65-8
5-Iodo-2-furaldehdye
CAS: 2689-65-8
Molecular Formula: C5H3IO2
2689-65-8 - Names and Identifiers
| Name | 5-Iodo-2-furaldehdye |
| Synonyms | 5-Iodofuraldehyde 5-Iodo-2-furaldehyde 5-Iodo-2-furaldehdye 5-IODO-2-FURALDEHYDE 5-iodo-2-furaldehdye OTAVA-BB BB7110951013 5-IODOFURANCARBOXALDEHYDE 5-Iodofurancarboxaldehyde 5-iodofuran-2-carbaldehyde 5-IODO-FURAN-2-CARBALDEHYDE 5-IODOFURAN-2-CARBOXALDEHYDE 5-Iodo-2-furancarboxaldehyde 5-Iodo-2-Furancarboxaldehyde 5-IODO-2-FURANCARBOXALDEHYDE 5-Iodofuran-2-carboxaldehyde~5-Iodofurfural |
| CAS | 2689-65-8 |
| EINECS | 625-542-0 |
| InChI | InChI=1/C5H3IO2/c6-5-2-1-4(3-7)8-5/h1-3H |
2689-65-8 - Physico-chemical Properties
| Molecular Formula | C5H3IO2 |
| Molar Mass | 221.98 |
| Density | 2.094±0.06 g/cm3(Predicted) |
| Melting Point | 125-128°C(lit.) |
| Boling Point | 274.5±25.0 °C(Predicted) |
| Flash Point | 119.8°C |
| Vapor Presure | 0.0054mmHg at 25°C |
| BRN | 108406 |
| Storage Condition | Refrigerator (+4°C) |
| Sensitive | Air & Light Sensitive |
| Refractive Index | 1.64 |
| MDL | MFCD00159503 |
| Physical and Chemical Properties | Melting Point: 126 - 127 |
2689-65-8 - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37 - Wear suitable protective clothing and gloves. S37/39 - Wear suitable gloves and eye/face protection S36 - Wear suitable protective clothing. |
| WGK Germany | 3 |
| HS Code | 29329990 |
| Hazard Class | IRRITANT |
2689-65-8 - Introduction
5-Iodo-2-furaldehdye(5-Iodo-2-furaldehyde) is an organic compound with the chemical formula C5H3IO2, which is a product obtained by replacing the hydrogen atom at the 2-position of furfural with an iodine atom.
Some important properties of 5-Iodo-2-furaldehdye are as follows:
-Appearance: Usually a yellow to orange solid
-Solubility: Soluble in organic solvents such as ethanol, dichloromethane and ether, less soluble in water
-Melting Point: about 70-73 ℃
-Boiling point: About 220-225 ℃
5-Iodo-2-furaldehdye has certain application value, some of which are important uses include:
-Used as an important intermediate in organic synthesis and can be used to synthesize other compounds
-As a compound to evaluate the antibacterial activity of plants, it has certain biological activity
The preparation method of 5-Iodo-2-furaldehdye can be carried out by the following steps:
1. First, furfural is reacted with iodine in a reaction solvent (such as acetic acid).
2. The reaction is usually carried out at high temperature and longer reaction time.
3. Finally, pure 5-Iodo-2-furaldehdye can be obtained by crystallization and crystallization purification.
When using 5-Iodo-2-furaldehdye, you need to pay attention to some safety information:
- 5-Iodo-2-furaldehdye may cause irritation to the eyes, skin and respiratory system, so direct contact should be avoided.
-Wear suitable personal protective equipment such as laboratory gloves, goggles and protective clothing when operating.
-Please operate in a well-ventilated environment when using.
- 5-Iodo-2-furaldehdye should be stored in a sealed container, avoid moisture and exposure to light.
In all cases, careful and safe laboratory practices should be followed when using and handling chemicals. Please make sure to read and understand the relevant safety instructions and operating methods before carrying out relevant work.
Some important properties of 5-Iodo-2-furaldehdye are as follows:
-Appearance: Usually a yellow to orange solid
-Solubility: Soluble in organic solvents such as ethanol, dichloromethane and ether, less soluble in water
-Melting Point: about 70-73 ℃
-Boiling point: About 220-225 ℃
5-Iodo-2-furaldehdye has certain application value, some of which are important uses include:
-Used as an important intermediate in organic synthesis and can be used to synthesize other compounds
-As a compound to evaluate the antibacterial activity of plants, it has certain biological activity
The preparation method of 5-Iodo-2-furaldehdye can be carried out by the following steps:
1. First, furfural is reacted with iodine in a reaction solvent (such as acetic acid).
2. The reaction is usually carried out at high temperature and longer reaction time.
3. Finally, pure 5-Iodo-2-furaldehdye can be obtained by crystallization and crystallization purification.
When using 5-Iodo-2-furaldehdye, you need to pay attention to some safety information:
- 5-Iodo-2-furaldehdye may cause irritation to the eyes, skin and respiratory system, so direct contact should be avoided.
-Wear suitable personal protective equipment such as laboratory gloves, goggles and protective clothing when operating.
-Please operate in a well-ventilated environment when using.
- 5-Iodo-2-furaldehdye should be stored in a sealed container, avoid moisture and exposure to light.
In all cases, careful and safe laboratory practices should be followed when using and handling chemicals. Please make sure to read and understand the relevant safety instructions and operating methods before carrying out relevant work.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: 5-Iodofurfural Visit Supplier Webpage Request for quotation
CAS: 2689-65-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 2689-65-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 5-Iodofurfural Visit Supplier Webpage Request for quotation
CAS: 2689-65-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 2689-65-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History