4-METHOXYPHENYLTRIMETHOXYSILANE
P-methoxyphenyltrimethoxysilane
CAS: 35692-27-4
Molecular Formula: C10H16O4Si
4-METHOXYPHENYLTRIMETHOXYSILANE - Names and Identifiers
| Name | P-methoxyphenyltrimethoxysilane |
| Synonyms | 4-(Trimethoxysilyl)anisole 4-METHOXYPHENYLTRIMETHOXYSILANE P-methoxyphenyltrimethoxysilane Trimethoxy(4-methoxyphenyl)silane rimethoxy-(4-methoxyphenyl)silane benzene, 1-methoxy-4-(trimethoxysilyl)- |
| CAS | 35692-27-4 |
| InChI | InChI=1/C10H16O4Si/c1-11-9-5-7-10(8-6-9)15(12-2,13-3)14-4/h5-8H,1-4H3 |
4-METHOXYPHENYLTRIMETHOXYSILANE - Physico-chemical Properties
| Molecular Formula | C10H16O4Si |
| Molar Mass | 228.32 |
| Density | 1.12 |
| Boling Point | 144 °C / 15mmHg |
| Flash Point | 94°C(lit.) |
| Vapor Presure | 0.108mmHg at 25°C |
| Appearance | clear liquid |
| Specific Gravity | 1.094 |
| Color | Colorless to Almost colorless |
| Storage Condition | Inert atmosphere,Room Temperature |
| Sensitive | 7: reacts slowly with moisture/water |
| Refractive Index | 1.4860 to 1.4910 |
4-METHOXYPHENYLTRIMETHOXYSILANE - Introduction
P-methoxyphenyltrimethoxysilane is an organosilicon compound with the chemical formula C10H16O4Si. It has the following properties:
1. appearance: colorless to light yellow liquid.
2. melting point:-65 ℃.
3. Boiling point: 158-160 ℃.
4. Density: 1.065 g/mL.
5. Refractive index: 1.462.
6. Solubility: Soluble in organic solvents, such as alcohol, ether, etc.
The main application of P-methoxyphenyltrimethoxysilane in the field of organic silicon chemical industry:
1. Surface treatment agent: It can be used as a surface treatment agent in coatings, paints and adhesives to improve adhesion and durability.
2. functional coating: can be used in waterproof coating, anti fouling coating and anti corrosion coating, to provide protection and durability.
3. Adhesive: It can be used as an adhesive between cellulose fibers and polymers to enhance the consolidation and temperature resistance of materials.
4. Filler: It can be used as a filler to improve the performance of injection molding and injection molding products.
P-methoxyphenyltrimethoxysilane are usually prepared by the following methods:
1. Trimethoxysilane reacts with 4-methoxybenzaldehyde to generate P-methoxyphenyltrimethoxysilane.
2. Through the condensation reaction of trimethoxychlorosilane and 4-methoxybenzaldehyde under alkali catalysis, P-methoxyphenyltrimethoxysilane is generated.
When using the P-methoxyphenyltrimethoxysilane, you need to pay attention to the following safety information:
1. the P-methoxyphenyltrimethoxysilane is flammable, and it is necessary to avoid contact with open flame and high temperature.
2. When using, it should be operated in a well-ventilated place to avoid inhaling gas or swallowing liquid.
3. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical help.
4. P-methoxyphenyltrimethoxysilane should be stored in a sealed container, away from fire and oxidizing agents.
5. When handling the compound, the relevant regulations and operating procedures should be observed.
1. appearance: colorless to light yellow liquid.
2. melting point:-65 ℃.
3. Boiling point: 158-160 ℃.
4. Density: 1.065 g/mL.
5. Refractive index: 1.462.
6. Solubility: Soluble in organic solvents, such as alcohol, ether, etc.
The main application of P-methoxyphenyltrimethoxysilane in the field of organic silicon chemical industry:
1. Surface treatment agent: It can be used as a surface treatment agent in coatings, paints and adhesives to improve adhesion and durability.
2. functional coating: can be used in waterproof coating, anti fouling coating and anti corrosion coating, to provide protection and durability.
3. Adhesive: It can be used as an adhesive between cellulose fibers and polymers to enhance the consolidation and temperature resistance of materials.
4. Filler: It can be used as a filler to improve the performance of injection molding and injection molding products.
P-methoxyphenyltrimethoxysilane are usually prepared by the following methods:
1. Trimethoxysilane reacts with 4-methoxybenzaldehyde to generate P-methoxyphenyltrimethoxysilane.
2. Through the condensation reaction of trimethoxychlorosilane and 4-methoxybenzaldehyde under alkali catalysis, P-methoxyphenyltrimethoxysilane is generated.
When using the P-methoxyphenyltrimethoxysilane, you need to pay attention to the following safety information:
1. the P-methoxyphenyltrimethoxysilane is flammable, and it is necessary to avoid contact with open flame and high temperature.
2. When using, it should be operated in a well-ventilated place to avoid inhaling gas or swallowing liquid.
3. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical help.
4. P-methoxyphenyltrimethoxysilane should be stored in a sealed container, away from fire and oxidizing agents.
5. When handling the compound, the relevant regulations and operating procedures should be observed.
Last Update：2024-04-10 22:29:15
Supplier List
Featured ProductsSpot supply
Product Name: Trimethoxy(4-methoxyphenyl)silane Visit Supplier Webpage Request for quotationCAS: 35692-27-4
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: p-METHOXYPHENYLTRIMETHOXYSILANE Visit Supplier Webpage Request for quotationCAS: 35692-27-4
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: Trimethoxy(4-methoxyphenyl)silane Visit Supplier Webpage Request for quotationCAS: 35692-27-4
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Product Name: 4-Methoxyphenyltrimethoxysilane Visit Supplier Webpage Request for quotation
CAS: 35692-27-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 35692-27-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Featured ProductsSpot supply
Product Name: Trimethoxy(4-methoxyphenyl)silane Visit Supplier Webpage Request for quotationCAS: 35692-27-4
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: p-METHOXYPHENYLTRIMETHOXYSILANE Visit Supplier Webpage Request for quotationCAS: 35692-27-4
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: Trimethoxy(4-methoxyphenyl)silane Visit Supplier Webpage Request for quotationCAS: 35692-27-4
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Product Name: 4-Methoxyphenyltrimethoxysilane Visit Supplier Webpage Request for quotation
CAS: 35692-27-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 35692-27-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History
4-METHOXYPHENYLTRIMETHOXYSILANE
癸二酸丁二酯
4-Picoline, 1-oxide
NSC 5104
2-Benzothiazolemethanamine,6-methoxy-alpha,alpha-dimethyl-(9CI)
1-Hydroxyethyne
3-(3-CHLORO-PHENYL)-3-OXO-PROPIONIC ACID ETHYL ESTER
SodiumMetabisulphiteAcs
二異丙乙胺
灭蚊菊酯
癸二酸丁二酯
4-Picoline, 1-oxide
NSC 5104
2-Benzothiazolemethanamine,6-methoxy-alpha,alpha-dimethyl-(9CI)
1-Hydroxyethyne
3-(3-CHLORO-PHENYL)-3-OXO-PROPIONIC ACID ETHYL ESTER
SodiumMetabisulphiteAcs
二異丙乙胺
灭蚊菊酯