5-Methoxy-alpha,alpha,alpha-trifluoro-2-picoline - Names and Identifiers
5-Methoxy-alpha,alpha,alpha-trifluoro-2-picoline - Physico-chemical Properties
Molecular Formula | C7H6F3NO
|
Molar Mass | 177.12 |
Density | 1.263±0.06 g/cm3(Predicted) |
Boling Point | 176.8±40.0 °C(Predicted) |
Flash Point | 88.7°C |
Vapor Presure | 0.171mmHg at 25°C |
pKa | -1.48±0.10(Predicted) |
Storage Condition | 2-8°C |
Refractive Index | 1.507 |
5-Methoxy-alpha,alpha,alpha-trifluoro-2-picoline - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
Hazard Class | IRRITANT |
5-Methoxy-alpha,alpha,alpha-trifluoro-2-picoline - Introduction
5-Methoxy-2-(trifluoromethyl)pyridine is an organic compound. The following is its nature, use, preparation and safety information:
Nature:
-chemical formula: C8H6F3NO
-Molecular Weight: 189.13
-Appearance: Light yellow liquid
-Melting point:-14 ° C
-Boiling point: 134-136 ° C
-Density: 1.35g/cm³
Use:
- 5-Methoxy-2-(trifluoromethyl)pyridine is a commonly used reagent in organic synthesis, which can be used to synthesize other organic compounds, such as pharmaceutical intermediates and pesticides.
-It is also used as a solvent in organic synthesis.
Method:
-5-methoxy -2-(trifluoromethyl)pyridine can be obtained by reacting methoxypyridine with a trifluoromethyl compound.
-A specific synthesis method may be, under an inert atmosphere, reacting methoxypyridine with trifluoromethanesulfonic acid or trifluoroacetic acid.
Safety Information:
- 5-Methoxy-2-(trifluoromethyl)pyridine is an organic compound that should be handled with caution to avoid contact with skin, eyes or inhalation.
-During use and storage, Good Laboratory safety practices need to be observed.
-When handling this compound, take appropriate personal protective measures, such as wearing protective glasses, gloves and laboratory coats.
-In addition, 5-Methoxy-2-(trifluoromethyl)pyridine should be stored in a sealed container, away from heat and fire sources.
Please follow the correct safety operation guidelines when operating and using 5-Methoxy-2-(trifluoromethyl)pyridine, and consult relevant professionals according to the situation.
Last Update:2024-04-09 02:00:44