627-08-7
PROPYLISOPROPYLETHER
CAS: 627-08-7
Molecular Formula: C6H14O
627-08-7 - Names and Identifiers
| Name | PROPYLISOPROPYLETHER |
| Synonyms | 1-ISOPROPOXYPROPANE PROPYLISOPROPYLETHER Isopropylpropyl ether Propane, 1-(1-methylethoxy)- |
| CAS | 627-08-7 |
627-08-7 - Physico-chemical Properties
| Molecular Formula | C6H14O |
| Molar Mass | 102.17 |
| Density | 0.7320 |
| Melting Point | 25°C |
| Boling Point | 83.05°C |
| Water Solubility | 4.678g/L(25 ºC) |
| Refractive Index | 1.3730 |
| Physical and Chemical Properties | EPA Chemical Information Propane, 1-(1-methylethoxy)- (627-08-7) |
627-08-7 - Upstream Downstream Industry
| Raw Materials | carbene SEC-BUTYL ETHYL ETHER ETHYL N-PROPYL ETHER |
627-08-7 - Introduction
PROPYLISOPROPYLETHER (propyl isopropyl ether) is an organic compound with the molecular formula C6H14O. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless liquid.
-Density: about 0.74g/cm³.
-Boiling point: About 110-112 ° C.
-Melting point: About -97 ° C.
-Solubility: Soluble in most organic solvents.
Use:
-as a solvent: PROPYLISOPROPYLETHER is commonly used as a solvent in organic synthesis, which can dissolve many organic compounds, such as fatty acid esters, fatty ketones, etc.
-Used for polyurethane foaming agent: PROPYLISOPROPYLETHER can be used as a purging agent for polyurethane foaming agent to improve the quality of foaming.
-for coatings: It can also be used in coating formulations as a diluent, volatile additives and synergist.
Method:
PROPYLISOPROPYLETHER can be prepared by the following reaction:
1. Reaction of isopropyl alcohol with propyl ether: isopropyl alcohol and propyl ether are heated to generate propyl isopropyl ether and water.
2. Reaction of isopropanol with propylene: Isopropanol and propylene are heated in the presence of an acid catalyst (e. G., sulfuric acid) to produce propyl isopropyl ether.
Safety Information:
-propylisopropylylether should be kept away from fire and high temperature, and avoid contact with open flames.
-Wear suitable protective gloves and goggles when using.
-Operate in a well-ventilated place to avoid inhalation or skin contact.
-In case of contact with skin, wash immediately with plenty of soap and water.
-If inhaled or taken by mistake, immediately move the patient to a fresh air and seek medical help.
Please note that this information is for reference only. Please read the safety data sheet and operating manual of the relevant substance carefully when using and storing chemical substances, and follow the correct operating procedures.
Nature:
-Appearance: Colorless liquid.
-Density: about 0.74g/cm³.
-Boiling point: About 110-112 ° C.
-Melting point: About -97 ° C.
-Solubility: Soluble in most organic solvents.
Use:
-as a solvent: PROPYLISOPROPYLETHER is commonly used as a solvent in organic synthesis, which can dissolve many organic compounds, such as fatty acid esters, fatty ketones, etc.
-Used for polyurethane foaming agent: PROPYLISOPROPYLETHER can be used as a purging agent for polyurethane foaming agent to improve the quality of foaming.
-for coatings: It can also be used in coating formulations as a diluent, volatile additives and synergist.
Method:
PROPYLISOPROPYLETHER can be prepared by the following reaction:
1. Reaction of isopropyl alcohol with propyl ether: isopropyl alcohol and propyl ether are heated to generate propyl isopropyl ether and water.
2. Reaction of isopropanol with propylene: Isopropanol and propylene are heated in the presence of an acid catalyst (e. G., sulfuric acid) to produce propyl isopropyl ether.
Safety Information:
-propylisopropylylether should be kept away from fire and high temperature, and avoid contact with open flames.
-Wear suitable protective gloves and goggles when using.
-Operate in a well-ventilated place to avoid inhalation or skin contact.
-In case of contact with skin, wash immediately with plenty of soap and water.
-If inhaled or taken by mistake, immediately move the patient to a fresh air and seek medical help.
Please note that this information is for reference only. Please read the safety data sheet and operating manual of the relevant substance carefully when using and storing chemical substances, and follow the correct operating procedures.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: Valproic Acid Impurity 108 Visit Supplier Webpage Request for quotationCAS: 627-08-7
Tel: 0714-3999186
Email: 2853786052@qq.com
Mobile: 86+15671228036
QQ: 2853786052
Wechat: 15671228036
Spot supply
Product Name: Valproic Acid Impurity 108 Visit Supplier Webpage Request for quotationCAS: 627-08-7
Tel: 0714-3999186
Email: 2853786052@qq.com
Mobile: 86+15671228036
QQ: 2853786052
Wechat: 15671228036
View History
Raw Materials for 627-08-7