AcryloxytrimethylsilaneinhibitedwithMEHQ(O-TMSacrylate) - Names and Identifiers
AcryloxytrimethylsilaneinhibitedwithMEHQ(O-TMSacrylate) - Physico-chemical Properties
Molecular Formula | C6H12O2Si
|
Molar Mass | 144.24 |
Density | 0.984 g/mL at 25 °C (lit.) |
Boling Point | 53 °C/0.2 mmHg (lit.) |
Flash Point | 5°F |
Vapor Presure | 23.1mmHg at 25°C |
Appearance | clear liquid |
Specific Gravity | 0.894 |
Color | Colorless to Light yellow |
Storage Condition | below 5° C |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | n20/D 1.4090(lit.) |
AcryloxytrimethylsilaneinhibitedwithMEHQ(O-TMSacrylate) - Risk and Safety
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R11 - Highly Flammable
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets.
|
UN IDs | UN 1993 3/PG 1 |
WGK Germany | 2 |
TSCA | Yes |
HS Code | 29319090 |
Hazard Class | 3 |
Packing Group | II |
AcryloxytrimethylsilaneinhibitedwithMEHQ(O-TMSacrylate) - Introduction
Acryloxytrimethylsilane is an organosilicon compound with the chemical formula (CHY3) Y3 SiOC(O)CH = CH₂. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: colorless liquid
-Molecular weight: 200.4g/mol
-Boiling Point: 183-185°C
-Density: Approximately 0.9 g/mL
-Solubility: Soluble in solvents such as alcohol, ether, ketone, etc., insoluble in water
Use:
-Acryloxy trimethylsilane is commonly used as a polymer modifier, which can combine with the polymer chain and improve the performance of the polymer.
-Because it contains propylene groups, it can be used as a crosslinking agent for the preparation of rubber, coatings and adhesives.
-When preparing silicon-based coatings, acryloyloxytrimethylsilane can be used as a silicone crosslinking agent and resin modifier.
Preparation Method:
-Acryloxy trimethylsilane can be obtained by reacting a silane-terminated carboxylic anhydride with acrylic anhydride. This reaction is usually carried out under an inert atmosphere, using a base as a catalyst.
Safety Information:
-Acryloxy trimethylsilane is irritating and flammable.
-Avoid contact with skin when using, and avoid inhaling its vapor or spray.
-In case of misuse or inhalation, seek medical attention immediately.
-Take appropriate safety precautions, use protective gloves and eye protection equipment, and maintain good ventilation during storage and handling.
Last Update:2024-04-10 22:29:15